







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Irvine, CA: What It Takes and What It Costs
Backsplash, tile and flooring work in Irvine typically runs $14,000 – $45,000 for a full kitchen tile and floor package, with a standalone backsplash landing between $800 and $2,500 and floor tile installed over a properly prepped substrate on a two-to-three-week schedule. Most of that time is prep, not tile. Call (833) 954-6066 for a free on-site estimate with a written line-item quote before anything gets demoed.
How the job actually runs, stage by stage

Tile work is mostly what happens before the first tile is set. Here’s the real sequence we follow, and where your decisions land.
Stage 1: Walkthrough, measurements and ARB review (day 1)
We measure every run of backsplash, check the floor for deflection and level, and photograph existing conditions. In Irvine this is also where we look at your community’s architectural guidelines, because if the tile or flooring change touches anything visible from outside or involves a unit in an attached building, your HOA’s architectural review committee (ARB) may need to sign off before work starts. You’ll pick your direction and shortlist materials here.
Stage 2: Demo and substrate prep (days 1 – 2 for a backsplash, days 2 – 4 for flooring)
Old backsplash comes off, drywall gets patched and skimmed flat, and the wall is primed and ready for thinset. Floors get old covering removed, subfloor inspected, and any soft spots or dips corrected. This is the stage that decides whether the finished job looks flat and even or wavy. We don’t rush it.
Stage 3: Layout and dry-fit (half a day)
We lay out tile on the wall or floor dry before setting anything, so you can see the actual pattern, grout line width and how cuts fall at corners, outlets and edges. This is your last easy chance to change your mind. Slab backsplash panels get templated here if you’re going that route.
Stage 4: Setting tile and grouting (days 3 – 5 for a backsplash, days 4 – 8 for floors)
Backsplash typically takes two to three working days to set and grout. Floor tile runs longer depending on square footage and pattern. Large-format tile and intricate patterns like herringbone add a day or more because every cut is slower.
Stage 5: Sealing, caulk and final walkthrough (day 6)
Grout gets sealed where the material calls for it, perimeter joints get flexible caulk instead of grout so movement doesn’t crack lines, and we walk the job with you. Anything that isn’t right gets fixed before we call it done. That’s what the 730-Day Done Right Promise backs up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
These are the real forks in the road on a tile job, and what each one costs you in money, time or upkeep.
- Ceramic vs. porcelain floor tile. Ceramic is cheaper and easier to cut, but it chips more readily and doesn’t handle moisture as well. Porcelain is denser, holds up better in kitchens and traffic areas, and is the sensible default for Irvine homes. Expect porcelain to run 20 – 40% more per square foot in material.
- Large-format vs. standard-size tile. Big tiles mean fewer grout lines and a cleaner look, but they demand a flatter substrate and cost more to install because of the handling and cutting. Standard 12×24 keeps the budget in check.
- Backsplash material: ceramic subway, porcelain, glass, or slab. Subway tile is the workhorse and sits at the low end of the $800 – $2,500 range. Glass reads bright but shows every smudge. A slab panel behind the range looks stunning and costs the most, plus it needs templating.
- Grout line width and color. Narrow lines look modern but show imperfections. Wider lines are more forgiving and easier to keep clean. Contrasting grout highlights the pattern; matching grout makes the field read as one surface.
- Layout and pattern. Straight lay is fastest. Herringbone, chevron and basketweave add labor and waste factor, often 10 – 15% more material.
- Underlayment and waterproofing. A crack-isolation membrane or cement board matters over wood-frame floors, which is most of Irvine’s tract housing. Skipping it is the most common cause of cracked tile later.
What Backsplash, Tile & Flooring costs in Irvine, CA

Full kitchen tile and floor packages here land between $14,000 and $45,000. A backsplash by itself runs $800 – $2,500; countertop-adjacent tile and island work run higher when a full kitchen is part of the picture. What pushes a job toward the top of that range:
- Square footage and layout complexity. A galley kitchen floor is a very different job from an open-plan kitchen with a peninsula, an island surround and a laundry alcove.
- Existing condition. Uneven subfloor, old adhesive, water damage or a floor that needs leveling all add prep hours. Prep is where surprise costs live, so we inspect before we quote.
- Material grade. Porcelain vs. ceramic, slab vs. mosaic, imported vs. domestic all shift the material line significantly.
- Pattern and cuts. Herringbone, large-format and diagonal layouts add labor and waste.
- Scope creep into related trades. Moving an outlet, relocating a gas line or adding a range hood changes what has to happen behind the tile.
Your written estimate should spell out demo, substrate prep, underlayment, setting materials, tile, grout, sealing and cleanup line by line. What it typically doesn’t include: structural repairs discovered after demo, appliance disconnection and reconnection, and any drywall or cabinet work beyond patching. Those get quoted in writing before we proceed, never tacked on after.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to this job
Irvine is a master-planned city, and that changes how tile work gets approved. Nearly every job sits inside an HOA-governed village with architectural review, color palettes and CC&Rs that can dictate materials and finishes. In older villages like Woodbridge and Northwood, a kitchen that faces a shared wall or window in an attached unit often needs ARB sign-off before the city permit is even issued. The building department and the architectural committee are two separate approvals, and a crew that shows up without them can be stopped mid-job.
The housing stock matters too. Most Irvine homes are 1970s-to-2000s wood-frame stucco and tile-roof construction, and kitchen floors in that era are often over a wood subframe that flexes. That’s why crack-isolation membranes aren’t optional here. In the Great Park and newer infill, denser attached product means party-wall and fire-separation detailing come into play when you’re redoing a shared wall. Irvine’s dry Mediterranean climate with hot Santa Ana wind events bakes and dries wood framing, then winter storms push moisture through, so we always check for soft subfloor and hidden water staining before setting tile.
We cover all of Irvine, including the 92606 and 92614 ZIPs, and we’re glad to talk through your community’s guidelines during the estimate so nothing gets held up.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in Irvine

A backsplash alone takes about three to four working days; a kitchen floor adds another week depending on square footage and pattern. A full backsplash-plus-floor package typically runs two to three weeks end to end, with the bulk of that in prep, setting and grout cure.
Cosmetic tile and flooring replacement generally doesn’t need a building permit, but anything touching plumbing, electrical or structural work does, and HOA architectural review may still be required even for interior finishes that show through a window or shared wall. We’ll tell you exactly which approvals apply to your address during the free estimate.
Yes. Most backsplash and floor jobs stay entirely in the finish layer, with no plumbing or framing changes at all. If the plan calls for relocating a sink, adding an island or opening a wall, that becomes a bigger scope and we quote it separately in writing.
Backsplash tile alone runs $800 – $2,500, while a full kitchen tile and floor package lands between $14,000 and $45,000. Material choice, pattern complexity and subfloor condition drive the number. Call (833) 954-6066 for a free estimate, with pricing locked in writing before work starts.
Every backsplash, tile and flooring job we do is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right, and our technicians have up to 12 years of experience on tile work like this.
Get a free estimate for Backsplash, Tile & Flooring in Irvine
Call (833) 954-6066 to schedule a free on-site estimate for backsplash, tile and flooring in Irvine. We’ll measure the space, inspect the substrate, review your HOA’s guidelines and hand you a written line-item quote with no surprises. If the tile work sits inside a bigger project, our kitchen remodeling service and our Kitchen Remodeling in Irvine page cover the wider scope, and homeowners often pair this with Vanities, Tile & Fixtures in Irvine or a Tub-to-Shower Conversion in Irvine. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.












