







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Irvine: What the Job Actually Involves
Custom and geometric windows in Irvine typically run $6,500 to $28,000 for a full home package, and most single-room installations finish in one to three days once the units arrive from the factory. The reason the range is wide is that Irvine is a master-planned city where almost nothing gets installed without an architectural committee’s sign-off first, so a big share of the timeline is approval, not labor. Call (833) 954-6066 to schedule a free on-site estimate and we’ll tell you which of your walls can actually take the shape you’re picturing.
How We Build Custom & Geometric Windows, Stage by Stage

Geometric units – arches, half-rounds, trapezoids, octagons, true radius tops – are made to order, so the sequence matters as much as the installation. Here’s how the job actually moves.
- Stage 1: Field measure and template (half a day). We measure every opening to the sixteenth and build a cardboard template for each geometric unit. Arched and angled openings are rarely square, especially in Irvine’s 1970s and 1980s wood-frame stucco homes where twenty-plus years of settling have moved the framing. You decide at this stage which openings get the specialty shape and which stay rectangular.
- Stage 2: ARB submission and permit (2 to 6 weeks, mostly waiting). In Irvine, your village’s HOA architectural review board usually has to approve the visible profile, exterior color and grille pattern before the city permit gets issued. We prepare the drawings and finish samples, you sign, and we track both approvals. You decide the exterior color and grid layout here, and this is where a wrong shade stops a job cold.
- Stage 3: Order and fabrication (4 to 8 weeks). Factory-built geometric windows take longer than stock sizes because the glass gets cut to the radius curve. You’ll pick glass package, frame material and hardware during this window. Nothing happens on site – we’re waiting on the manufacturer.
- Stage 4: Removal, prep and install (1 to 3 days per room). We pull the old unit, inspect for rot in the rough opening, repair or reframe as needed, flash the exterior properly and set the new window. Each opening is sealed, insulated and trimmed before the next one starts.
- Stage 5: Stucco patch, paint and final walk (1 day). Exterior stucco gets patched and textured to match, trim gets painted to the approved color, and we walk every unit with you, operate it, and confirm it latches, locks and drains correctly.
If the shape change is part of something bigger, it’s often part of a Windows & Doors in Irvine project we’re handling alongside it, and the sequencing gets planned as one job instead of two.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make on Custom & Geometric Windows
The shape is the fun part. The spec behind it is what determines how it holds up under Irvine’s sun, so here’s the honest trade-off on each decision.
- Frame material: vinyl vs. aluminum-clad wood vs. fiberglass. Vinyl is the value pick and handles Irvine’s dry heat well, but it can’t hold a very tight radius cleanly. Aluminum-clad wood (Andersen and Marvin both make specialty shapes) gives you crisp geometry and a wood interior, at roughly 30 to 50 percent more than vinyl. Fiberglass sits between them and resists the heat cycling better than vinyl over time.
- Glass package. Irvine gets long rainless stretches and hot Santa Ana wind events, so low-E with argon is worth the upgrade – it cuts solar heat gain on west-facing arches that otherwise bake the room. Standard dual-pane is fine on north walls.
- Grille pattern and muntins. Simulated divided lites give you the tract-home look most Irvine HOAs expect. A clean single-pane geometric unit is a different aesthetic and, in older villages, may not match the community’s design vocabulary.
- Radius vs. segmented arch. A true radius costs more because the glass and frame are curved to order; a segmented arch approximates the look with straight pieces for less money and is fine on smaller windows.
- Hardware and operation. Casement, awning, fixed and tilt-turn are all doable in geometric shapes; fixed is the cheapest, and most arched units above a door or bed are fixed anyway.
Brands we spec for these units include Andersen and Marvin for the wood-clad specialty work, with ES Windows for impact-rated configurations. If you’d rather see the full catalog of what we install, start with our Windows & Doors service page.
What Custom & Geometric Windows Cost in Irvine, CA

Most geometric window projects we quote in Irvine land between $6,500 and $28,000, with single specialty units running $1,200 to $4,500 each depending on size and glass. Here’s roughly what moves the number:
- Shape complexity: a half-round is straightforward; a trapezoid or an eyebrow arch with a tight radius adds cost because the glass and frame are cut to order.
- Unit size and glass area: a large arched picture window carries a much higher glass and freight cost than a small octagon.
- Existing condition: if the rough opening is rotten or out of square, reframing and stucco repair add $400 to $1,500 per opening.
- Material grade: vinyl versus aluminum-clad wood can swing the total by 30 to 50 percent.
- Permit and ARB scope: a change to the opening size needs a permit and possibly engineering; a same-size swap is simpler.
A written estimate from us is line-item: unit cost, labor, stucco patch, paint, permit and disposal, all spelled out. Upfront pricing, no surprises – the number you see is the number you pay. What typically isn’t included is interior drywall repair beyond patching and any structural work if the opening is being enlarged, which we quote separately once we’ve opened the wall.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine is almost entirely master-planned, which means nearly every custom and geometric window job happens inside an HOA-governed village. In Woodbridge and Northwood, the older villages, the housing stock dates to the 1970s and 1980s wood-frame stucco construction, and the original window profiles are part of the tract’s design vocabulary – an architectural committee will look at whether your new arched unit matches the neighbors. In the Great Park and newer infill, you’re working with denser attached product where party-wall and fire-separation detailing matters, and the design standards skew contemporary. Either way, the HOA review usually comes before the city permit, so we build both into the schedule from day one. The climate adds its own pressure: Santa Ana wind events and long dry stretches bake the stucco and dry out wood framing, then the first big winter rain finds every failed seal. We see the most failed window flashing in Irvine after that first storm, not during summer.
We cover the whole city and its surrounding villages – you can see the full area we serve on our Irvine page.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Irvine

Plan on 8 to 14 weeks from signed contract to finished install, with the actual on-site work taking only one to three days per room. The wait is fabrication plus HOA and city approval, not labor.
Yes – any window replacement in Irvine requires a building permit, and a change to the opening size or shape also needs plan review. On top of that, most villages require architectural review board approval before the permit is issued. We handle both submissions for you.
In most cases, yes. A same-size specialty swap doesn’t touch plumbing or framing, and that’s the majority of what we do. If you want to enlarge an opening or add a new arched window in a solid wall, that involves framing and possibly a structural engineer, and we’ll tell you upfront what it adds.
Most full projects run $6,500 to $28,000, with individual specialty units at $1,200 to $4,500 apiece. Call (833) 954-6066 for an exact quote – estimates are free.
Our workmanship is backed by the 730-Day Done Right Promise, and the window manufacturer’s own product warranty passes through to you. If something isn’t right, we make it right. Call (833) 954-6066 to talk through your project.
Get a Free Estimate on Custom & Geometric Windows in Irvine
We’ll come out, measure the openings, look at your village’s architectural standards and give you a written line-item estimate at no cost. Call (833) 954-6066 and a live person answers, day or night. On the call we’ll ask what shapes you have in mind and which village you’re in, then set a time to walk the house. If you’re planning other exterior work, homeowners often pair this with Concrete Driveways & Concrete Work in Irvine or Asphalt Driveways & Resurfacing in Irvine to get the whole exterior done in one pass.
Written by the team at Groundwork Construction Co.












