







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Coto de Caza, CA: What They Cost and How the Job Runs
Custom & Geometric Windows in Coto de Caza typically run $8,000 to $25,000 for a full-house package with arched, radius, trapezoid or angled units, and $4,000 to $9,000 for a smaller set of feature windows. Most jobs take two to four weeks from template to final trim, because every non-rectangular unit is built to a field measurement. Call (833) 954-6066 for a free on-site estimate and we’ll put real numbers on your specific openings.
How we build and install a geometric window package, stage by stage

The hardest part of a geometric window job isn’t the glass. It’s the fact that a radius or angled unit can’t be made until the opening is measured in the field, so the schedule is driven by order dates, not by crew speed.
Stage 1: Field measure and opening verification (day 1, 2 to 3 hours)
We template every opening by hand: radius, arc rise, leg height, spring line, mullion centers, and the true plumb of the wall. On Coto de Caza estates built in the late 1980s through the 2000s, we regularly find rough openings that are out of square by a half inch or more, and that gets recorded now, not after the unit arrives. You decide which openings get the upgrade and confirm the style direction this day.
Stage 2: HOA submission and window schedule sign-off (days 2 through 10)
Every exterior change here goes in front of the CZ Master Association’s architectural review, so the window schedule (unit locations, grille patterns, frame color, glass type) gets built into a submittal package you approve before it goes out the door. You sign the schedule and the product spec. Nothing gets ordered until that approval lands.
Stage 3: Fabrication (weeks 3 through 7, depending on unit type)
Rectangular units arrive fast. Radius and true arch units from a manufacturer like ES Windows or ECO Window Systems take longer because each one is built to the template. We schedule installation the week units land and confirm the delivery window with you in writing.
Stage 4: Removal, framing and install (2 to 4 days for a typical package)
Old units come out, framing gets squared and shimmed, flashing goes in, and each unit is set, plumbed and secured. Geometric units get extra attention at the curved head, where water wants to sit. Interiors get patched and trim goes back on the same visit when the drywall scope allows.
Stage 5: Sealing, finish and walkthrough (1 to 2 days)
Exterior sealant joints, interior caulk, touch-up, and a full operation check on every operable unit. You walk the job with us, and anything that isn’t right gets written on the punch list and handled before final payment.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Custom & Geometric Windows are a spec job, not a catalog job. Here’s what moves the look, the price and the long-term performance.
- Frame material: Vinyl is the value choice and holds up well in this inland heat, but color options are limited. Aluminum-clad wood gives you the authentic divided-lite look that suits these estates and takes any paint color, at roughly 30 to 50 percent more. Fiberglass sits between them and resists heat cycling without warping.
- Glass package: Dual-pane low-E with argon is the baseline. On west- and south-facing walls in this valley, adding a solar-control coating keeps summer heat gain down and protects furnishings from UV.
- Grille and geometry style: True divided lites, simulated divided lites, or a clean single pane. Each arch or half-round can be a single fixed unit or divided into segments. More segments means more fabrication time and more cost.
- Operation: Fixed units are the cheapest and most thermally tight. Operable arched and awning units add hardware and cost, so reserve them for rooms that need the ventilation.
- Entry glass coordination: If the adjacent entry door is being refreshed, a Therma-Tru system with matching glass and finish keeps the elevation coherent rather than mixing two frame profiles side by side.
What Custom & Geometric Windows costs in Coto de Caza, CA

Plan on $4,000 to $9,000 for a small set of feature windows, and $8,000 to $25,000 for a full-house package with custom shapes. Larger estate elevations and heavy radius work push toward the top of that band.
Five variables decide where your job lands:
- Number and size of custom units: A single half-round over a front door is a modest line item. Six arched units across a two-story elevation is a different job.
- Geometry complexity: True radius, trapezoid, angled and eyebrow units cost more to fabricate than rectangles, and every unique shape needs its own template.
- Existing wall condition: Stucco patching, reframing an out-of-square opening, or replacing damaged sheathing adds labor.
- Material grade: Vinyl at the low end, aluminum-clad or fiberglass at the high end, and glass coatings stack on top.
- Permit and HOA scope: County permits plus a CZ Master Association submittal add time and administrative cost, but skipping either isn’t an option here.
A written estimate covers the units, field templating, removal and disposal, flashing, installation, sealant and interior trim. It does not cover drywall repair beyond minor patching, exterior stucco refinishing, or painting. You’ll see those listed separately so there’s no surprise line item later. This pricing stays consistent with our Windows & Doors in Coto de Caza page, since geometric work is part of that same scope when a homeowner is redoing the whole envelope.
See the difference
Before
After
Before
After
Before
AfterWhat Coto de Caza homes specifically do to this job
Coto de Caza isn’t a tract neighborhood, and the window work shows it. Nearly every exterior change, including a new window profile or frame color, has to clear the CZ Master Association’s architectural review on top of county permits. That means the submittal package, the design palette and the window schedule all get built before a single unit is ordered. Contractors who don’t routinely submit HOA packages burn weeks here. We build the package into the schedule.
Private road access and staging rules add another layer. Deliveries and material staging have to be coordinated so the street stays clear, which shapes how we sequence installation days.
The housing stock is large custom and semi-custom estates from the late 1980s through the 2000s, often on half-acre-plus lots. Those homes were built with generous glass and a lot of arched and angled units, and by now many of those units are fogged, hard to operate, or leaking at the curved head. On sloped lots, winter rain and the occasional Santa Ana wind event stress the flashing and sealant at every non-rectangular opening, so we inspect and re-flash those during install rather than assuming the old work held. We handle the same Coto de Caza elevations across the community.
Serving Coto de Caza, CA – Our Local Coverage Area
We serve Coto de Caza and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Coto de Caza

Two to four weeks from template to final trim for a typical package, with custom fabrication accounting for most of that time. Complex estate elevations can run longer. Call (833) 954-6066 for a schedule based on your actual openings – estimates are free.
Yes. County permits plus the CZ Master Association’s architectural review are both required for exterior window changes here. We build the submittal and the window schedule into your scope so nothing stalls mid-job. Call (833) 954-6066 to start the paperwork with a free estimate.
Usually. Most replacements go into the existing rough opening with new flashing and trim, so you’re not relocating structure. If an opening is badly out of square or a curved head has rotted framing, that gets addressed during install. We’ll tell you at the estimate which openings need extra work.
Expect $4,000 to $9,000 for a small feature set and $8,000 to $25,000 for a full-house package. Frame material, glass coating, unit count and geometry complexity drive the spread. Call (833) 954-6066 for an exact quote – estimates are free.
Every installation is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer warranties on the units come with the product. Call (833) 954-6066 and we’ll walk you through both in writing.
Get a free estimate on Custom & Geometric Windows in Coto de Caza
Call (833) 954-6066 to schedule a free on-site estimate. We’ll measure the openings, talk through geometry and material options, and hand you a written line-item quote with the HOA submittal and permit scope built in. Live person answers around the clock. Many homeowners pair window work with a full envelope refresh through our Windows & Doors service, and some pair exterior updates with Concrete Driveways & Concrete Work in Coto de Caza or Asphalt Driveways & Resurfacing in Coto de Caza.
Written by the team at Groundwork Construction Co.












