







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Lake Forest, CA: What They Cost and How Long They Take
Custom & geometric windows in Lake Forest typically run $8,000 – $25,000 for a whole-house package and $2,500 – $6,500 per opening for a one-off arch, eyebrow, trapezoid or circle-head unit, installed and finished. Most of that band is glass and frame grade, not labor. A single arched window over an entry takes about 3 – 5 weeks from template to final trim; a full home’s worth runs 7 – 11 weeks. Call (833) 954-6066 for a free on-site measure and a written line-item quote.
The Real Sequence for a Custom & Geometric Window Job Here

Shaped windows are not a swap. They’re fabricated to the opening, which means the schedule has more decision points than a standard replacement and a few that have to happen in the right order. Here’s how we run it.
Stage 1: On-site measure and template (day 1, about 90 minutes)
We measure the rough opening, check the wall for square and plumb, and note whether the existing frame is straight or the wall has settled. For a true arch or eyebrow, a field template gets taken or a radius is measured off the finished framing. You decide the shape family and where it lands. We don’t order anything until you’ve signed off on the drawing.
Stage 2: HOA submittal and permit (weeks 1 – 4, overlaps with fabrication)
This is the step that stalls most Lake Forest projects. If your community’s architectural committee needs to see window drawings, a product spec sheet and a photo of the street-facing elevation, we prepare that packet. Most jobs here clear the HOA review before the city permit comes back, but the order isn’t guaranteed, and a speculative window order placed before HOA approval can turn into a costly re-cut.
Stage 3: Fabrication (weeks 3 – 8, depending on shape and glass)
Standard rectangles come off the line fast. Trapezoids, segmental arches and true radius units take longer because the glass is cut and tempered to a template. Multi-pane geometric clusters take longest. You’ll see a shop drawing at this stage and sign it before the units are built.
Stage 4: Demo, install and finish (2 – 3 days on site)
The old units come out day one, the opening gets flashed and sealed, and the new frame is set and shimmed. Day two is typically glass set, trim and interior drywall patching. Day three is caulk, paint touch-up and a water test around the perimeter. Most single-opening jobs finish inside two days.
Stage 5: Final walk-through and warranty handoff (day 3)
We show you the operation of any operable units, hand over the manufacturer’s glass warranty, and note what falls under the 730-Day Done Right Promise on our workmanship. If a seal or a trim joint fails inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Custom & geometric windows aren’t a single product. Almost every job comes down to four decisions, and each one has a real cost trade-off.
- Frame material: wood vs. clad wood vs. fiberglass. Wood is warm and paints beautifully but needs exterior upkeep every few years in our sun. Aluminum-clad wood (we lean on Andersen and Marvin for shaped units) holds finish longer and suits the stucco-and-trim look common in Lake Forest, at roughly 25 – 40% more than plain wood. Fiberglass handles heat and dry air with the least movement, but the finish options for arches are narrower.
- Glass: dual-pane vs. laminated vs. low-E. Dual-pane is the baseline. Laminated glass cuts sound and adds break resistance, useful on the street-facing side. Low-E matters more on west- and south-facing windows where afternoon sun drives interior heat; the upcharge is usually modest and pays back in comfort.
- Shape family. Rectangles and half-rounds are the most economical because tooling is common. Trapezoids, quarter-rounds, eyebrows and true circle-heads cost more per opening, and a cluster of three or more shapes between two fixed panes pushes the job toward the top of the range.
- Operable vs. fixed. A geometric unit is usually fixed, but operable awning or casement shapes exist and add hardware, sealing complexity and cost. For a transom over a door or a gable-end accent, fixed is the honest choice.
What Custom & Geometric Windows Cost in Lake Forest, CA

For a whole-house package of custom and geometric units, plan on $8,000 – $25,000, installed, trimmed and painted. Single architectural openings land at $2,500 – $6,500 each. A simple arched window over the front door with standard glass sits near the low end; a multi-shape great-room cluster with laminated glass and cladding pushes to the high end.
What moves the number:
- Shape and quantity. Each unique radius or angle is a cut-to-template unit, so five different shapes cost more than five of the same shape.
- Frame and glass grade. Clad wood and laminated glass are the two biggest jumps. You can move a job $3,000 – $6,000 either direction on those two specs alone.
- Opening condition. Square, flashed, watertight openings install clean. Settled framing, rotted sills or a wall that needs reframing adds carpentry and drywall time.
- Interior finish level. Paint-ready drywall patch vs. stained trim vs. a custom casing detail all price differently.
- Permit and HOA scope. City permit plus HOA architectural submittal adds time and paperwork to every job in Lake Forest’s planned communities.
Our written estimate is line-item, so you see the unit cost, installation, trim, permit and any contingency separately. The number you see is the number you pay: no change orders unless you change the scope.
See the difference
Before
After
Before
After
Before
AfterWhat Lake Forest Homes Specifically Do to This Job
Lake Forest is a master-planned, HOA-heavy city where almost every exterior change runs through architectural review and CC&R approval before a permit is even pulled. That reality shapes how we schedule custom window work here. In communities off Portola Parkway and around the Lake Forest Sports Park area, the architectural committee often takes longer to approve a window drawing than the city takes to issue the permit, which is why we submit the HOA packet in week one rather than waiting for the city. Neighbors here routinely compare approved trim colors and window profiles, so a shape that reads well on paper can still get kicked back if the finish doesn’t match the approved palette.
The housing stock adds its own twist. Most homes in 92630 were built between the 1970s and 1990s, so we’re usually working around original framing that has dried out in our hot, dry summers and Santa Ana wind events. We see it most on south- and west-facing walls: single-pane glass that has lost its seal, hardened caulk around an arch, and stucco that has cracked at the corner of a geometric opening. That’s the failure mode we plan for on every job, and it’s why we check the wall for plumb and re-flash before anything new goes in.
Serving Lake Forest, CA – Our Local Coverage Area
We serve Lake Forest and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Lake Forest

A single custom opening typically runs 3 – 5 weeks from template to final trim; a whole house takes 7 – 11 weeks. The bulk of that is fabrication and HOA review, not install time, which is usually 2 – 3 days on site. Call (833) 954-6066 and we’ll give you a dated schedule for your own job.
Yes. In almost every case here, both a city permit and HOA architectural approval are required before work starts, and the HOA review frequently outlasts the permit. We prepare and submit both packets as part of the job. Call us for a free estimate and we’ll walk you through your community’s specific requirements.
In most rooms, yes. We can fit a shaped unit into the existing rough opening or within the current window footprint. The exception is a project that requires enlarging the opening into a bearing wall, which needs structural work and a bigger permit scope. We’ll tell you which one you’re looking at during the on-site measure.
Expect $8,000 – $25,000 for a whole-house package and $2,500 – $6,500 per individual shaped opening, installed. The variables that move that number most are glass grade and frame material. Call (833) 954-6066 for an exact quote – estimates are free.
Our labor and workmanship are covered by the 730-Day Done Right Promise, and the manufacturer’s glass and frame warranty is passed to you in writing at handoff. If a trim joint or a perimeter seal fails inside our window, we come back and make it right. Call us to see the warranty terms before you commit.
Get a Free On-Site Estimate for Custom & Geometric Windows in Lake Forest
We’ll come to your home, measure every opening, note the wall condition and any HOA requirements, and hand you a written line-item quote with a dated schedule. No pressure, no guesswork. Most homeowners pair this kind of work with other exterior upgrades: our Windows & Doors in Lake Forest page covers the wider project scope, and neighbors often pair window work with Concrete Driveways & Concrete Work in Lake Forest or Asphalt Driveways & Resurfacing in Lake Forest when they’re refreshing the front of the house at the same time. See our full Windows & Doors service, check the Lake Forest service area, and call (833) 954-6066 for your free estimate.
Written by the team at Groundwork Construction Co. of Tustin.












