







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Laguna Hills: What the Job Actually Involves
Custom & geometric windows in Laguna Hills typically run $8,000 – $25,000 installed, and a whole-house package of arches, trapezoids, or radius units takes three to six weeks from template to trim-out. These are the windows that don’t come off a shelf: arched transoms over a front door, angled corner glass on a hillside view wall, half-round units tucked into a gable. Every piece is measured, templated, and built to order. Call (833) 954-6066 and we’ll walk your house, measure the openings, and put a written range in your hands before you commit to anything.
How we build custom and geometric windows, stage by stage

No two of these jobs look alike, but the sequence is steady. Here’s what actually happens, in order, and what you’ll be deciding along the way.
1. Site walk and opening assessment (day 1, about 90 minutes)
We measure every opening, check the framing behind the existing trim, and note whether the wall is square or has settled. On the older 1960s – 70s tracts off Alicia Parkway this matters, because original framing has had decades to move. You decide the rough scope: one feature window or a full elevation.
2. Template and design confirmation (days 2 – 10)
Arches and angles get templated on site so the factory builds to the actual opening, not a nominal size. You choose glass package, frame material, and finish at this stage. Changing your mind after templating means a rebuild, so this is the decision point we slow down on.
3. Manufacturing (three to six weeks, typical)
Geometric units are built to order. Andersen and Marvin both handle radius and arch work with long lead times; simpler rectangular customs move faster. We give you a firm install window here, not a vague “sometime in spring.”
4. Removal, framing, and install (two to four days)
The old unit comes out, the rough opening gets squared and shimmed, and the new frame is set, flashed, and sealed. Most jobs finish in a single visit once the product lands. Structural changes or a new opening added to a load-bearing wall stretch this to a week and pull in a framing crew.
5. Trim, finish, and walkthrough (day after install)
Interior and exterior trim go back on, we seal the perimeter, and you walk the job with us before we leave. Anything that isn’t right gets fixed under the 730-Day Done Right Promise. If the window work is part of a full Windows & Doors in Laguna Hills project, we sequence it so the trim-out doesn’t fight the other trades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Custom geometric windows come down to a handful of real choices, and each one trades cost against how long the unit holds up in Saddleback Valley heat and wind.
- Frame material: Vinyl runs $300 – $700 per unit for standard sizes and handles heat well but can’t always hold a tight radius. Wood-clad aluminum (Andersen 400 Series territory) costs more, holds a crisp geometric shape, and takes paint and stain; it’s the right call for a feature arch you’ll look at every day.
- Glass package: A basic dual-pane runs standard; adding low-E and argon pushes you $80 – $200 per unit and cuts solar heat gain, which matters on west-facing glass in July. Tempered glass is required for units close to the floor or in doors.
- Shape complexity: A rectangular custom is the cheapest. An arch or half-round adds $200 – $600 per unit for the curved build. A true trapezoid or angled corner unit is the top of the range because the factory builds a one-off frame.
- Frame color and finish: Standard colors are included; a custom paint match adds lead time and cost. For Mediterranean-style two-story homes here, a bronze or dark finish that matches the existing package usually reads best.
- Hardware and operation: Fixed units are cheapest. Operable casement or awning versions of a geometric window add cost and complexity but give you ventilation on a view wall.
We quote the real trade-offs, not just the low number. If you’d rather see the full menu of options in our Windows & Doors service, that page lays out the rest.
What Custom & Geometric Windows cost in Laguna Hills, CA

Expect $8,000 – $25,000 for a custom and geometric package in Laguna Hills. A single feature arch might sit near the bottom of that; a whole elevation of radius, trapezoid, and angled units runs to the top. Line items we quote:
- Single geometric feature unit: $800 – $2,500
- Full package of custom/geometric windows (5 – 10 units): $8,000 – $25,000
- New opening cut into a load-bearing wall: add $1,500 – $4,000 for framing and header work
- Custom color or finish match: add $150 – $500 per unit
- Permit and inspection fees: $300 – $900 depending on scope
What pushes a job to the high end: the number of one-off shapes, whether you’re adding an opening versus replacing one, and how much structural or framing work the wall needs. What’s included in our written estimate: measurement, templating, the units, install, flashing, sealing, and trim. What typically isn’t: drywall repair beyond the opening, painting, and any structural engineering if the wall turns out to need it. Upfront pricing, no surprises – the number we write is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 takes the sting out of a bigger package.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Hills homes specifically do to this job
Laguna Hills is a young city – incorporated in 1991 from the merger of Laguna Hills and Leisure World – and that history shows up in the housing stock. The 1960s – 70s single-story tracts often still have original windows set in framing that’s settled, so a “standard” arch rarely fits without templating. In the 1980s – 90s Mediterranean two-story homes and planned-community townhomes off Moulton Parkway, the geometry is usually the original architectural feature, and matching a new unit to an existing stucco-and-tile elevation takes care. Santa Ana winds are the other factor: west- and north-facing glass takes real wind load, and we spec the frame and glazing to handle it. Add hillside lots where grading and HOA design review govern any new opening, and you get a job where the paperwork and the templating matter as much as the install. Call (833) 954-6066 to schedule your free estimate – we cover Laguna Hills and the surrounding Saddleback Valley.
Serving Laguna Hills, CA – Our Local Coverage Area
We serve Laguna Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Laguna Hills

Plan on three to six weeks from template to trim-out. Most of that is manufacturing lead time for the one-off shapes; the install itself is usually two to four days. Call (833) 954-6066 for a schedule built around your order.
Yes, window replacement and any new opening generally requires a permit and inspection. The city’s building department reviews the scope, and hillside or HOA-governed properties may need design review on top. We pull the permits and pass the inspections – you don’t chase paperwork. Call (833) 954-6066 to talk through what your specific property needs.
In most replace-in-place jobs, yes. If the new unit goes into an existing opening of the same size, no plumbing or framing changes are needed. Adding a new opening to a load-bearing wall does require a header and framing, and that’s the case where we bring in structural input. Call (833) 954-6066 and we’ll tell you which situation you’re in.
Expect $1,500 – $4,000 on top of the window cost for framing, header, and finish work on a new load-bearing opening. That’s separate from the unit price and permit fee. Call (833) 954-6066 for a written range before any work starts.
Our 730-Day Done Right Promise covers workmanship for two full years – if it’s not done right, we make it right. The units themselves carry the manufacturer’s warranty, and we walk you through what that covers at the estimate. Call (833) 954-6066 with questions before you sign anything.
Get your free custom & geometric windows estimate in Laguna Hills
Call (833) 954-6066 and a live person answers, day or night. We’ll set a time to walk your house, measure every opening, and hand you a written line-item estimate for your custom and geometric windows – free, no obligation, with the 730-Day Done Right Promise behind the work. If you’re reworking the exterior at the same time, homeowners often pair this with Concrete Driveways & Concrete Work in Laguna Hills or Asphalt Driveways & Resurfacing in Laguna Hills. Estimates are free – call today.
Written by the team at Groundwork Construction Co.












