







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Yorba Linda, CA: What It Costs and How It Gets Built
A wood fence in Yorba Linda typically runs $3,500 – $9,000, and most residential lots are finished in two to four working days once materials are on site. That covers demo of the old fence, new posts set in concrete, and a full run of cedar or pressure-treated boards. Exact cost depends on linear footage, height, gate count, and how tight the access is. Call (833) 954-6066 for a free on-site estimate with a written line-item price.
How a Wood Fence Gets Built in Yorba Linda, Step by Step

People ask us all the time what actually happens after they say yes. Here’s the real sequence, not a sales version of it.
Stage 1: On-site measure and layout (about 45 minutes)
We walk the property line with you, mark post locations, and confirm the fence sits inside your lot. This is where you decide fence height (most Yorba Linda yards go 6 feet, with 7 feet on view lots), gate placement, and which side faces the neighbor. Anything that touches a property line gets settled with your neighbor before we start, not after.
Stage 2: Utility marking and demo (day 1)
Before a single post hole gets dug, we call for utility locating. That step is not optional on any fence job, and Yorba Linda’s older lots sometimes have irrigation lines and landscape wiring buried within a foot of the property line. Once the marks are confirmed, we pull the old fence out – panels, posts, and the concrete footings – and haul it off the same day. Homeowners don’t have to stage any debris.
Stage 3: Post setting (day 1 into day 2)
Posts go in hole by hole, set in concrete and checked for plumb and consistent depth. This is the part that decides whether the fence stays straight in ten years. On Yorba Linda’s clay soil, post depth and drainage at the base matter more than they do on sandy ground, so we set deeper and crown the concrete so water sheds away from the wood. Concrete needs a cure window before the panels go on, which is why post day and panel day are usually separate.
Stage 4: Rails, boards, and gates (day 2 to day 3)
Rails get fastened, boards go up, and gates get hung with hardware you actually chose rather than whatever was in the truck. This is where you decide board style: dog-eared, flat-top, or a decorative top cap, plus whether you want a kickboard at the bottom to close the gap. Expect this stage to run a full day on a standard lot, longer if the run is over 150 feet or the yard has tight corners.
Stage 5: Walkthrough and final adjustments (day 3 to day 4)
We walk the whole run with you. Gates get adjusted so they swing clean, boards get checked for gaps and alignment, and any post that shifted during curing gets corrected. That final pass is part of the job, and it’s covered under the 730-Day Done Right Promise: if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Wood fence isn’t one product. Here’s what actually changes the job, and what each choice costs you in money or longevity.
- Cedar vs. pressure-treated pine. Cedar holds up better to sun and resists rot without chemical treatment, but it costs roughly 20 – 30% more. Pressure-treated pine is the budget pick and does fine in most Yorba Linda yards if it’s sealed. If your fence line gets full afternoon sun along a hillside lot, cedar earns its price.
- Board style. Dog-eared is the standard and cheapest. Flat-top looks cleaner and costs a little more per board. Top caps and trim rails add a finished look and add cost.
- Height. Six feet is the Yorba Linda default. Seven feet tightens privacy on view lots but adds material and can bump you into a taller permit category, so check before you commit.
- Post spacing and footing. Eight-foot spacing is standard. Six-foot spacing gives a stronger fence on windy ridgeline lots and costs more in posts and concrete.
- Gates and hardware. A pedestrian gate, a double gate for trailer access, or self-closing hardware all change the price. Expect to spend several hundred dollars per gate on top of the fence run.
- Finish. Stain and sealer extend the life of any wood fence by years. Some homeowners seal at install, others wait a season for the wood to dry out first.
What a Wood Fence Costs in Yorba Linda, CA

Most wood fence jobs in Yorba Linda land between $3,500 and $9,000. Here’s how that range breaks down.
| Scope | Typical Price Range |
|---|---|
| Standard 6-foot cedar or pine fence, 100 – 150 linear feet | $3,500 – $6,000 |
| Larger or taller run, 150 – 250 linear feet | $6,000 – $9,000 |
| Pedestrian gate, installed with hardware | Add several hundred dollars per gate |
| Double drive gate | Add more than a pedestrian gate |
| Old fence demo and haul-away | Usually included in the range |
Four things push a job toward the high end: total linear footage, how much concrete and demo the old fence leaves behind, the material grade you pick, and access. A hillside lot with a steep fence line and no room for a trailer slows the crew down, and that shows up in the number. Tight side-yard access does the same. Every quote we write is a line-item estimate, so you see the footage, material, gate count, and demo as separate lines. Upfront pricing, no surprises, and the number you see is the number you pay. What’s usually not included: stain or sealer, landscape repair after demo, and any work to remove trees, shrubs, or hardscape sitting in the fence line. Those get quoted as their own line if you need them.
See the difference
Before
After
Before
After
Before
AfterWhat Yorba Linda’s Housing and Hills Do to a Fence Job
Yorba Linda’s housing is mostly 1960s-1980s single-family homes on generous lots across 92886 and 92887, plus a wave of custom hillside builds. That mix shapes fence work in a way that flat neighboring cities don’t have to deal with. On the ridgeline lots off the eastern hills, fence lines follow slopes, so panels get stepped rather than run level, and posts near the top of a retaining wall need a footing that accounts for the wall below. Near the Nixon birthplace and the older ranch-era lots, we regularly find old post footings and landscape irrigation buried close to the property line, which adds a demo step. And Yorba Linda’s clay soil swells with winter rain, which is why posts here need proper depth and a concrete crown that sheds water. Hot Santa Ana winds are hard on wood too. We see more wind-loosened posts and split rails on exposed ridgeline runs than on sheltered interior lots. All fence work here is permitted through the City of Yorba Linda’s own building department, and any fence tied to a hillside retaining wall gets reviewed alongside the grading scope. If your project goes wider, that’s part of a full Fence Installation in Yorba Linda scope and we can walk you through it. We cover Yorba Linda property line by property line, and our Fence Installation service covers everything from a single run to a whole-perimeter rebuild.
Serving Yorba Linda, CA – Our Local Coverage Area
We serve Yorba Linda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Yorba Linda

Most residential wood fence jobs in Yorba Linda finish in two to four working days. A 100-foot run with one gate is usually a two-day job; longer runs, steep slopes, and extra gates push it to four. Weather is the wildcard. Rain slows concrete curing, so we schedule around it rather than work through it. Call (833) 954-6066 for a firm timeline once we’ve measured.
Many wood fence installs in Yorba Linda do need a permit through the City of Yorba Linda’s building department, and the answer depends on height, location, and whether the fence sits on a slope or ties into a retaining wall. We pull the permit and handle inspection scheduling; you don’t chase paperwork. Call (833) 954-6066 and we’ll confirm what your specific lot requires.
A wood fence in Yorba Linda usually runs $3,500 – $9,000 depending on footage, height, material, gate count, and access. Cedar costs more than pressure-treated pine, and steep or tight lots add labor. Every quote is a written line-item estimate with the demo, materials, and gates broken out. Call (833) 954-6066 for an exact quote; estimates are free.
Yes, in most cases. We can pull and reset fence sections around mature shrubs, irrigation, and existing retaining walls without disturbing them, and we flag anything that sits in the fence line before demo starts. On hillside lots where the fence runs above a wall, we check the wall first. Call (833) 954-6066 to walk the line together.
Every wood fence we build is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a post heaves or a gate hangs wrong, we come back and fix it. Materials carry their own manufacturer coverage on top of that. Call (833) 954-6066 with any warranty question.
Get a Free Estimate on Your Wood Fence in Yorba Linda
Call (833) 954-6066 and a live person answers, day or night. We’ll set a time to walk your property line, measure the run, and hand you a written line-item estimate for your wood fence in Yorba Linda. No pressure and no surprises. Every job is backed by the 730-Day Done Right Promise, with $1,000 off projects over $10,000 and 0% financing for 18 months available. Homeowners often pair a new fence with Paver Driveways in Yorba Linda or Concrete Driveways & Concrete Work in Yorba Linda while the crew is already on site.
Written by the team at Groundwork Construction Co.












