







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Yorba Linda: Cost, Timeline, and What’s Actually Involved
Paver driveways in Yorba Linda usually run $7,000 – $18,000 and take 4 to 7 working days from demo to final sealer, depending on square footage, base depth, and how tight the apron or street access is. Most homes here sit on hillside lots with a sloped approach, so the base prep and edge restraint matter more than the pavers themselves. Call (833) 954-6066 for a free on-site estimate with a line-item price you can hold us to.
How We Build a Paver Driveway, Stage by Stage
No two properties in Yorba Linda drive the same way, so the sequence below is the standard we follow. At each stage we tell you what we’re deciding and why.
- Site visit and measure (day 1). We measure the driveway footprint, note the existing surface (usually aged concrete or failed asphalt), check the slope and drainage direction, and photograph the street approach. You’ll tell us your paver style and color preference, and we’ll tell you candidly whether your subgrade can hold a paver driveway or needs extra base work first. This is also where we flag whether your project falls under Yorba Linda’s grading and slope-stability review if your lot sits on a steep ridgeline.
- Demo and haul-off (days 1 – 2). We break out the old surface, load it out, and inspect the exposed subgrade. On Yorba Linda lots, we sometimes find clay that swells with winter rain, which means extra excavation and a thicker compacted base. Expect a full day for demo on a standard two-car driveway.
- Base prep and compaction (days 2 – 3). We lay and compact the aggregate base in lifts, check the slope for drainage, and set the edge restraint. This is the stage that determines whether your driveway stays flat for the next 20 years. It’s also the stage a lot of cheap bids skip.
- Paver installation and cutting (days 3 – 5). We set the pavers in the pattern you selected, cut edges to fit, and compact the field. This is where you confirm sand-joint versus poly-sand joints – we’ll explain the trade-off so you can decide.
- Finishing (day 5 – 7). We sweep in joint sand, clean the surface, and apply sealer if you’ve chosen it. We walk the finished driveway with you and hand over care instructions and your written warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Paver driveways come down to four real decisions, and each one moves the price and the durability in a different direction:
- Paver material. Concrete pavers run $4 – $8 per square foot installed and hold up well to heat and traffic. Clay brick pavers run $8 – $15 per square foot and look richer on a custom home, but color can vary batch to batch. Natural stone (travertine, granite) runs $12 – $25 per square foot and suits a hillside view lot, but it stains and needs resealing more often.
- Paver thickness and grade. Standard 60mm pavers handle a residential driveway fine. 80mm pavers cost more per square foot but resist shifting on a sloped drive, which matters on the hillside lots we see off the eastern ridgeline.
- Pattern and layout. A simple running bond keeps cutting waste low. Herringbone or basketweave patterns add 10 – 15% to labor for the extra cuts but give a more finished look that pairs well with a custom entry.
- Joint and edge treatment. Polymeric sand or poly-sand joints cost more than ordinary sand but resist washout in the Santa Ana winds and seasonal rain. A concrete or steel edge restraint is non-negotiable for a driveway that sees vehicle loads.
Brands like Belgard and Sakrete show up in our paver and base material selections. We’ll show you physical samples so you’re choosing a finish you can actually see, not a catalog swatch.
What Paver Driveways Cost in Yorba Linda, CA

Our numbers for this market: paver driveway installation is $7,000 – $18,000 for a typical Yorba Linda two- or three-car drive. Here’s what pushes a job toward either end:
- Square footage. A 400 square foot drive runs toward the low end; a 900 square foot hillside drive with an extended turnaround runs toward the high end.
- Existing surface condition. A failed asphalt drive with a soft subgrade adds demo and excavation cost. Sound concrete or an existing base means less work.
- Slope and grading. Steep ridgeline elevations often require retaining or grading that falls under Yorba Linda’s hillside review, adding time and permit cost.
- Paver material grade. Clay brick or natural stone at the top of the range, standard concrete pavers at the bottom.
- Permit scope. A simple paver swap is usually fast to permit. Grading, slope-stability work, or drainage changes require more review from the City of Yorba Linda building department.
A written estimate should itemize demo, base depth, compaction, paver cost per square foot, joint sand, edge restraint, sealer, and permit fees. What typically isn’t included: unexpected subgrade excavation if clay or old roots turn up, and any retaining wall. We price those explicitly before work starts – the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterHow Yorba Linda Lots Specifically Change This Job
Yorba Linda was built largely on former ranch and citrus land, and most of the housing in ZIP codes 92886 and 92887 is 1960s – 1980s single-family construction on generous hillside lots. That means the drives we build here are usually longer, more sloped, and less forgiving than the flat tract drives you’d find in Placentia or Anaheim. Clay soil that swells and shrinks with the wet/dry cycle is a common cause of driveway cracking we’re called out to fix, which is exactly why we don’t skip the subgrade inspection. The Santa Ana winds and seasonal wildfire risk also mean we don’t drop the ball on edge restraint or joint sand – a driveway that looks fine in April but shifts by August gets a callback we’d rather avoid.
Permitting for anything beyond a simple surface swap runs through the City of Yorba Linda’s own building department, and any grading or slope work on a steep eastern ridgeline lot falls under the same hillside and slope-stability review that governs retaining walls. If your project turns into a bigger paver-and-grading scope, it’s often part of a full Driveway & Pavers in Yorba Linda plan we can scope together. Homeowners who are expanding their footprint often pair this with ADU Design & Permitting in Yorba Linda or a Garage Conversion ADU in Yorba Linda, since a new structure usually means reworking the drive and apron anyway. We can walk the whole site with you and confirm our Driveway & Pavers scope covers what your lot needs.
Serving Yorba Linda, CA – Our Local Coverage Area
We serve Yorba Linda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Yorba Linda

Most paver driveways in Yorba Linda finish in 4 to 7 working days, including demo, base, install, and finishing. Larger drives with significant grading can push past 10 days. We sequence around your vehicle access, so you’re not stuck without a parking spot for the whole week. Call (833) 954-6066 to get your timeline locked in.
Often yes, especially if grading, slope work, or drainage changes are involved. A simple surface swap may not require a full permit, but the City of Yorba Linda’s building department controls the call. We handle the permit review and inspections so you’re not the one chasing paperwork. Call (833) 954-6066 for a straight answer on your lot.
Sometimes, but not always. A sound surface with proper slope can sometimes take an overlay, but failed concrete or a soft subgrade means we need to demo and rebuild the base. We’ll tell you honestly on the site visit whether an overlay is safe. Estimates are free – call (833) 954-6066.
Paver driveway installation in Yorba Linda runs $7,000 – $18,000, with the range driven by size, slope, material grade, and permit scope. We give you a written line-item quote before we start, and the number doesn’t change mid-job unless we hit something we disclose and agree on first. Call (833) 954-6066 for your exact number.
Every paver driveway we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. We put it in writing. Call (833) 954-6066 to discuss what’s covered.
Get a Free Paver Driveway Estimate in Yorba Linda
We’ll walk your drive, measure the lot, and hand you a written, line-item estimate for paver driveways in Yorba Linda – at no cost. A live person answers the phone 24/7, no voicemail black holes. We cover Yorba Linda and the surrounding hills, and our technicians have up to 12 years of experience on jobs exactly like yours. Call (833) 954-6066 and we’ll schedule a time that works.
Written by the team at Groundwork Construction Co.












