







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Irvine, CA: What It Costs and What’s Involved
A wood fence in Irvine typically runs $3,500 to $9,000 for a standard residential run, with most single-family lots landing between $4,800 and $7,200. That covers removal of the old fence, new posts set in concrete, cedar or pressure-treated boards, and a finished gate. Timeline is usually 2 to 4 working days once HOA architectural approval clears. Call (833) 954-6066 for a free on-site estimate.
The real arc of a wood fence project, stage by stage

Fence work looks simple from the sidewalk. In Irvine it rarely is, because the approval chain runs ahead of the build. Here’s what actually happens on a job, in order, so you know what to expect and when you’ll be asked to decide something.
Stage 1: Site visit and boundary check
We walk the property line with you, confirm the fence sits inside your lot or on the shared line per your plat, and note what’s buried or growing where posts will go. Irrigation lines, gas stubs to a patio grill, and mature tree roots all get flagged here. This is also when we measure the total run in linear feet and count gates. Takes 45 to 90 minutes. You decide nothing yet except whether you want a single or double gate.
Stage 2: HOA architectural submission
Irvine is master-planned from the ground up, so most villages run architectural review before a single permit is pulled. We prepare the submittal for you: fence style, height, board profile, stain or paint color from the approved palette, and a site sketch showing setbacks. Review timelines vary by village and committee meeting schedule, and a wrong shade or a non-conforming cap sends the packet back. You decide the style and finish here. We handle the paperwork.
Stage 3: Permit and utility locate
Once the committee signs off, we file with the city and call for the 811 utility locate, which typically takes 2 to 3 business days to mark. Post holes don’t get dug until the marks are painted. You decide nothing in this stage. Scheduling the crew comes after, usually inside the same week.
Stage 4: Demo and installation
Day one is removal, haul-away, and post layout. Posts go in 24 to 30 inches deep, set in concrete, and cure overnight. Rails and boards go up days two and three. A 150-linear-foot run with two gates typically closes out in 3 working days. Your decision on day one is confirmation of gate swing direction and any board-spacing preference.
Stage 5: Final walk and stain
We walk the line together, check plumb and gate swing, and confirm the cap and trim match the approved submittal. If you’re staining, cedar needs to dry before the finish goes on, so stain is often scheduled a few weeks out. That’s a separate decision you can defer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What you’re actually choosing between on a wood fence
Most of the cost swing comes from species and post method, not board count. Here’s how the options break down.
- Cedar vs. pressure-treated pine. Cedar is the default in Irvine for a reason: it sheds water, resists termites without chemical treatment, and holds a stain well. Pine costs less up front and is fine for a painted finish, but it needs more maintenance in our dry, sun-baked summers.
- Posts in concrete vs. posts on a base. Setting posts in concrete is standard and what we recommend. Some HOAs prefer a steel post anchor system where the fence sits against a shared wall or slope. That method costs more and depends on the village.
- Board-on-board vs. dog-eared privacy. Board-on-board gives full privacy with no gaps and holds up to Santa Ana winds. Standard dog-eared boards are cheaper and let wind through, which actually reduces load on the posts.
- Height. Six feet is the common residential height in Irvine. Anything taller needs a variance from the city and a conversation with the committee.
- Stain vs. paint. Stain shows grain and suits cedar. Paint is more uniform and matches HOA color palettes that specify a shade. Paint needs recoating more often.
Most Irvine homeowners land on cedar board-on-board with concrete-set posts and a stain that matches the approved palette. That’s the configuration we build most in Woodbridge and Northwood.
What a Wood Fence costs in Irvine, CA

Expect $3,500 to $9,000, with the bulk of residential jobs between $4,800 and $7,200. A short run on a small lot sits at the low end. A long shared boundary with gates and a stain package sits at the high end.
- Linear footage is the single biggest driver. A 60-foot side yard and a 200-foot perimeter are very different numbers.
- Species and grade of the boards and posts push the total by hundreds of dollars. Cedar over pine is the main split.
- Removal and haul-away of an existing fence adds cost. Old posts set in concrete take real time to pull.
- Gate count and hardware. Each gate adds framing, hinges, and a latch. Double gates and gates on a slope cost more.
- Slope and soil. Irvine has expansive clay in parts of the city, so some runs need deeper post holes or stepped rails, which adds labor.
- HOA and permit overhead. Submittal prep and city permit fees are line items, not surprises tucked into the total.
A written estimate we hand you lists each of these: linear feet, species, post method, demo, gates, stain, permit, and HOA submittal. What it typically does not include is landscaping restoration beyond basic cleanup, irrigation rerouting if a line needs to move, or a variance fee if the run requires one. Those get quoted separately before any work starts, so the number on the estimate is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to a wood fence job
Irvine is a master-planned city built by the Irvine Company from the 1970s onward, which means nearly every fence we build sits inside an HOA village with its own architectural committee and CC&Rs. In Woodbridge and Northwood, the older villages, fence style and stain color often need to match the original tract vocabulary, and the committee has the submittal on file from when the home was built. In Great Park and newer infill, the standards are contemporary and attached product brings party-wall and fire-separation detail into play. The practical upshot: a crew that shows up with the wrong stain or a non-conforming cap can be stopped mid-job.
The housing stock is overwhelmingly wood-frame stucco and tile-roof tract homes from the 1970s through the 2000s across villages like Turtle Rock, Westpark, and Woodbridge. That age shows up in fences too. Original cedar fences from the 1970s and 80s are at end of life, and we regularly see rails pulled loose from posts after a Santa Ana wind event. The dry, rainless stretches bake the wood, then the first big winter storm finds every soft post. We cover Irvine ZIP codes 92602, 92617, 92619, and 92604, and we’re glad to look at yours.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Wood Fence in Irvine

A standard residential run takes 2 to 4 working days on site once HOA architectural approval and permits clear. The approval and permit phases run ahead of that and typically add a few weeks depending on the village committee’s meeting schedule. Call (833) 954-6066 for an exact timeline for your lot.
Yes, most residential fences require a city permit, and HOAs require architectural approval before the permit is even issued. The two run in sequence, not in parallel, so plan for both. We handle the submittal and the permit filing for you. Call (833) 954-6066 and we’ll walk you through what your village requires.
Almost always yes. Fence work doesn’t touch the house structure, and we plan around irrigation lines and gas stubs rather than relocating them. The utility locate in Stage 3 tells us where the buried lines are, and we set posts clear of them. If a line truly has to move, that’s quoted before any work begins.
Most jobs land between $4,800 and $7,200, with the full range from $3,500 to $9,000 depending on footage, species, gate count, and slope. Call (833) 954-6066 for a free on-site estimate with a line-item quote.
Every wood fence we build is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, post setting, and gate function. Your door and window hardware choices are yours to pair in when the timing fits, and homeowners often pair this with Paver Driveways in Irvine when they’re reworking the side yard access.
If you’re planning the wider yard, it’s often part of a full Fence Installation in Irvine project, and many Irvine homeowners pair the wood run with Concrete Driveways & Concrete Work in Irvine to finish the perimeter in one go. You can see the full scope of our Fence Installation work and the towns we cover on the Irvine service-area page.
Get a free Wood Fence estimate in Irvine
Call (833) 954-6066 and we’ll schedule a free on-site estimate. On the visit we measure the run, check the boundary, flag any buried lines, and identify what your HOA committee will want to see. You get a written line-item quote with no surprises and a clear timeline from approval to final walk. No-hassle upfront pricing, and the number on the estimate is the number you pay.
Written by the team at Groundwork Construction Co.












