







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in North Tustin: What It Costs and How Long It Takes
An aluminum fence in North Tustin typically runs $3,500 to $9,000 for most residential runs, with the lead price for a standard ornamental aluminum installation landing between $3,500 and $9,000 depending on footage, height, and style. A typical job takes two to four days on site: one day to set out and dig, one to set posts in concrete, and one to two to hang panels, gates, and caps once the concrete cures. Call (833) 954-6066 for a free on-site estimate and a written line-item quote before any work starts.
How We Build an Aluminum Fence, Stage by Stage

Aluminum fencing rewards planning. The panels are light and strong, but the finish and alignment are what separate a fence that looks crisp in ten years from one that rattles and sags in three. Here’s how the work actually sequences on a property in North Tustin.
Stage 1: Site walk and layout (day 1, half a day)
We walk the property line with you, confirm the run, and mark every post location with stakes and string. This is where you decide panel height (4, 5, or 6 feet are standard for residential), gate placement, and whether any section steps down a slope. On North Tustin’s hillside lots, step-downs are common, and racking panels to follow grade is a design choice you’ll make here, not later.
Stage 2: Digging and post holes (day 1 to day 2)
Posts get set in concrete footings sized to the local soil and wind load. On sloped ground we may need deeper footings on the downhill side to hold the fence line. We confirm utility locates are clear before any digging begins, which is a decision point for you: give us a call early so the locate and any right-of-way questions are settled before the crew arrives.
Stage 3: Setting posts (day 2)
Posts go in, get plumbed, and the concrete cures. We don’t hang panels the same day the posts go in. Curing overnight, sometimes longer in cool weather, keeps the fence true. This is the stage homeowner decisions pause: once posts are set, moving a gate means re-digging, so gate swing and latch side get locked in before we pour.
Stage 4: Hanging panels and gates (day 3)
Panels mount to the posts, gates hang and get adjusted for swing and latch, and caps go on. We check every hinge, confirm the gate clears the ground by the right margin, and walk the run with you. If you chose a self-closing or keyed gate, this is when we test it.
Stage 5: Final walkthrough and cleanup (day 3 to day 4)
We haul off spoils, sweep the line, and do a final walkthrough. You get a written closeout: what was installed, the finish warranty details, and how to care for the coating. The whole job is covered by our 730-Day Done Right Promise: if anything isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Choose Between
Most of the buying decision happens before a single post is dug. Here’s what actually moves the look, the durability, and the number.
- Style and picket pattern: A flat-top, a spear-top, or a loop-and-picket ornamental panel all use the same aluminum but read very differently against a hillside lot. Spear-top suits a traditional estate look; flat-top is cleaner on a modern ranch.
- Height and spacing: Standard residential runs are 4 to 6 feet. Taller sections cost more per foot and may need deeper footings. Tighter picket spacing is a code and safety consideration around pools, and you’ll confirm that on the walk.
- Finish and color: Powder-coated finishes in black, bronze, and white are standard. The coating is what protects the aluminum from the inland foothill sun; a quality powder coat holds color far better than a painted finish. Ask about the finish warranty before you commit.
- Racking vs. stepped panels: On a slope, panels can rack to follow the grade or step in blocks. Racking looks smoother; stepping is often simpler on steeper drops.
- Gate hardware: Standard latch or self-closing hinge, keyed entry, and gate width all affect price. A wider gate needs a sturdier frame and heavier hinges.
Aluminum itself is a low-maintenance choice: it doesn’t rot, it doesn’t need staining, and it holds up well against the hot, dry summers and Santa Ana wind events that push through this part of Orange County. The trade-off is upfront cost compared with a basic wood or vinyl run, and a finish that can chip on impact and needs touch-up. For a homeowner who wants the fence done once and forgotten, that trade-off usually pays off. If your wider project includes fencing alongside hardscape, our fence installation service covers the full scope, and the material partners we work with meet the same standard on every trade.
What Aluminum Fence Costs in North Tustin, CA

Residential aluminum fence installation in North Tustin runs $3,500 to $9,000 for most projects, with the $4,000 to $10,000 range covering larger runs, taller sections, and heavier gate work. Here’s how the variables move the number from the low end to the high end.
- Linear footage: The single biggest lever. A short side-yard run sits near $3,500; a full perimeter run pushes toward $9,000 or more.
- Terrain and slope: North Tustin’s hillside lots mean deeper footings on the downhill side, more racking or stepped panels, and more labor. Flat ground is the low end.
- Existing fence removal: Demo and haul-away of an old wood or chain-link fence adds cost. A clean site is cheaper.
- Gates and hardware: Each gate adds material and labor. Self-closing hinges, keyed entry, and wider gates push the number up.
- Finish and style: Premium powder-coat colors and ornamental patterns cost more per panel than a standard flat-top.
A written estimate from us itemizes the run length, post count, gate count, footing depth, demo, and finish. What it doesn’t include, unless we note it: utility relocation, permit fees where a permit is required, and any landscaping repair after the line is dug. No-hassle upfront pricing means the number you see is the number you pay, with no change orders hiding in the fine print. Estimated range is $3,500 – $9,000; call (833) 954-6066 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhat North Tustin Homes Specifically Do to This Job
North Tustin is an unincorporated slice of Orange County wedged between Tustin and Santa Ana, so construction work here runs through Orange County’s OC Public Works and OC Development Services rather than a city building counter. That matters for fence work: the permit path and inspection sequence are county, not city, and a contractor who’s used to pulling from a city counter can stall on the county process. When a fence is part of a full Fence Installation in North Tustin scope that includes retaining or grading on a hillside lot, that county process is what governs it.
The housing stock shapes this too. Much of the area is large half-acre-to-one-acre lots in the lemon-grove-turned-estate neighborhoods around Newport Ave and Foothill, plus mid-century ranch homes from the 1950s through the 1970s. On the big grove-era lots, we regularly see old property lines that don’t match the current fence, aging retaining walls, and unpermitted prior additions that inspectors flag. That’s a good reason to confirm your line and any slope work before we set posts. The hot, dry summers and Santa Ana wind events also drive up interest in a wind-resistant, fire-hardened exterior line, which aluminum handles well. We cover all of North Tustin including 92711.
Serving North Tustin, CA – Our Local Coverage Area
We serve North Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Aluminum Fence in North Tustin

Most aluminum fence jobs take two to four days on site, factoring in a cure day for the post concrete. A short side-yard run can finish in two days; a full perimeter with gates runs closer to four.
In many cases a residential fence doesn’t need a permit, but because North Tustin is unincorporated Orange County, the rules follow the county rather than a city, and height and location rules apply. We confirm what your specific property requires before work starts. Call (833) 954-6066 and we’ll check for your address.
An aluminum fence install doesn’t require moving plumbing or structure; posts are set along the line in their own footings. The only utility concern is locating buried lines before digging, which we confirm early. On a sloped lot, we may need to adjust posts around a retaining wall or mature tree roots.
Most residential aluminum fence jobs land between $3,500 and $9,000, with larger runs, steeper slopes, and heavier gates pushing toward $9,000 or more. Call (833) 954-6066 for an exact quote; estimates are free.
Every aluminum fence project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That backs the workmanship on top of the manufacturer’s finish warranty on the powder coat. Call (833) 954-6066 to review the details on your estimate.
Get a Free Aluminum Fence Estimate in North Tustin
Call (833) 954-6066 to schedule a free on-site estimate for your aluminum fence in North Tustin. A live person answers around the clock, so there’s no voicemail and no waiting until Monday. We’ll walk the line, confirm height, style, gates, and slope, and hand you a written line-item quote. If hardscape is part of the plan, homeowners often pair fencing with Driveway Repair & Replacement in North Tustin or Patios, Walkways & Pool Decks in North Tustin.
Written by the team at Groundwork Construction Co..












