







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in North Tustin, CA: What They Cost and What the Job Actually Involves
Custom and geometric windows in North Tustin typically run $8,000 to $25,000 for a multi-opening project, and a single feature window (arch, trapezoid, half-round, or angled corner unit) usually lands between $1,800 and $6,500 installed. Most homes need three to six weeks from template to final inspection. Call (833) 954-6066 for a free on-site estimate. The number you see on our written quote is the number you pay.
How We Plan and Install Custom & Geometric Windows in North Tustin

Shaped windows aren’t a box you slide into a rough opening. Every arch, eyebrow, and trapezoid gets built to a template taken from your actual wall, and that sequence is worth understanding before you sign anything.
Stage 1 – Site visit and template (day one, about 90 minutes)
We measure the existing opening, check the wall for square, and photograph the framing behind the trim where we can see it. You decide on window style and glazing here, and you’ll want to know whether the opening is original 1960s-era framing or a later remodel. On North Tustin’s sloped lots, we also look at how the window drain plane relates to grade; a sill that sits too close to soil is a leak waiting for the next Santa Ana wind-driven rain.
Stage 2 – Template build and manufacturer order (days two to five)
We cut a physical template of the opening on site, because a radius measured off a photo is a radius that comes back wrong. The order goes to the manufacturer with your glass package and finish selection. This is when lead time starts: shaped units from ES Windows or ECO Window Systems usually run three to five weeks, and custom radii or unusual geometry add a week or more.
Stage 3 – Prep and framing modifications (one to two days on site)
Old units come out, and we inspect the framing. Rot in the sill or header is common in homes of this era, and we replace what’s soft rather than covering it. Any header that needs to be widened or re-supported for a shape change gets done now, with structural work signed off before glass ever arrives. You approve any framing repair scope at this point, in writing, before we proceed.
Stage 4 – Installation and flashing (one to three days)
Units go in, shimmed and plumb, with flashing integrated into the weather barrier. This is where geometric windows separate the careful installers from the fast ones. The jamb-to-sill radius and the head flashing have to shed water in one continuous path, and we check that with a hose test on the uphill side of the house before we call it finished.
Stage 5 – Trim, sealant and final inspection (one day)
Interior trim, exterior sealant, and a final walkthrough with you. If your project required an Orange County permit, the inspection happens at the end of this stage. We don’t close a job until it passes. Everything we install sits under our 730-Day Done Right Promise, and if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Custom & Geometric Windows
Most of the decisions happen early, and each one swings both cost and performance. Here’s what actually matters:
- Vinyl frames (ES Windows, ECO Window Systems): The workhorse choice for arch and geometric units. Lowest cost, no painting, good thermal performance. Trade-off: fewer finish options and a slightly bulkier frame profile that some homeowners find plain next to a 1950s ranch’s original wood trim.
- Fiberglass or clad wood: Holds a crisp profile and takes stain or paint when you’re matching original detailing. Costs more, suits custom estates where the window is part of the architecture. Expect a noticeable premium per opening.
- Therma-Tru entry and sidelight assemblies: Where a geometric window sits beside a front door, matching the door and window system as a package keeps the finish consistent. Worth doing when the entry is part of the same project.
- Glass package: Standard dual-pane is the baseline. Low-E and tempered glass add cost but matter on west- and south-facing windows in North Tustin’s hot inland foothill summers. Every geometric unit is tempered by code in most configurations, since it’s a fixed non-operable unit at height.
- Fixed vs. operable: Most geometric windows are fixed. If you want an operable arch or awning hybrid, that’s a special order and adds lead time and cost.
What Custom & Geometric Windows Cost in North Tustin, CA

Plan on a range of $1,800 to $6,500 per geometric opening, with a whole-project figure of $8,000 to $25,000 for a typical four to eight opening project that includes a mix of standard replacement and custom shapes. The variables that push a job to the high or low end:
- Opening geometry. A half-round or eyebrow is simpler than a full arch that has to line up across an elevation. Complex or mismatched radii raise both manufacturing and template labor.
- Existing condition. Rotted sills, out-of-square framing, or a prior unpermitted opening all add repair scope. On older grove-era lots we find more of this than we’d like.
- Material grade. Vinyl lands at the low end; clad wood or fiberglass can push per-opening cost up substantially.
- Structural or opening changes. Widening a header or converting a fixed wall into a glazed corner changes the framing scope and the permit scope with it.
- Permit scope. A like-for-like replacement may not need one; a new or enlarged opening through Orange County usually does, and that adds inspection time and fees.
A written estimate from us breaks out each opening, glass package, framing repair, and permit line item separately, so you can see exactly where the dollars go. What it doesn’t include: painting, interior drywall repair beyond the trim line, and any landscaping disturbed by exterior access.
See the difference
Before
After
Before
After
Before
AfterWhat North Tustin Homes Specifically Do to This Job for Custom & Geometric Windows
North Tustin is unincorporated Orange County, wedged between Tustin and Santa Ana, so permits run through OC Public Works and OC Development Services rather than a city counter. That changes the timeline: county plan review and inspection scheduling works on a different clock than a city, and we plan lead time around it. The bigger local reality is the housing stock. Much of North Tustin’s housing is mid-century ranch from the 1950s through the 70s, plus larger custom estates built on former citrus land around Newport Ave and Foothill, and many sit on half-acre to one-acre sloped lots. On those lots, we regularly see original 1960s single-pane units where the sill has been sitting close to grade or a hillside retaining wall for decades, and water has been getting in slowly the whole time. Inspectors here also tend to flag unpermitted prior additions and aging retaining walls during window and exterior work, and if that turns up, we plan around it rather than pretend we didn’t see it. Homes near the county line in North Tustin see the same Santa Ana wind-driven rain that makes flashings fail fast, which is why we test before we close. When the exterior scope grows, homeowners often pair this with Concrete Driveways & Concrete Work in North Tustin or Asphalt Driveways & Resurfacing in North Tustin, and if you’re touching trim and siding too, it’s worth looking at the full scope in our Windows & Doors in North Tustin page. For a wider view of everything we do under that umbrella, see our Windows & Doors service, and for the surrounding communities we cover, visit North Tustin.
Serving North Tustin, CA – Our Local Coverage Area
We serve North Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in North Tustin

Typical projects run three to six weeks from template to final inspection, with most of that being manufacturer lead time for shaped units. Install itself is usually one to three days on site. County permit review on new or enlarged openings can add a week or more; call (833) 954-6066 and we’ll give you a real schedule for your opening count.
It depends on the scope. Like-for-like replacement in an existing opening often doesn’t require one, but new openings, enlarged openings, or structural framing changes through Orange County do. We pull the permits and pass the inspections when they’re required. Call (833) 954-6066 and we’ll tell you in plain terms whether your project needs one.
Most geometric openings run $1,800 to $6,500 installed, with whole-home projects at $8,000 to $25,000 for four to eight openings including a mix of shapes. Material grade, existing framing condition, and permit scope move the number. Call (833) 954-6066 for an exact quote – estimates are free.
In most cases yes, when the new unit matches the existing rough opening. If you’re changing the shape or size, framing usually has to change with it, and that’s where structural work and permits come in. We’ll tell you which side of that line your project falls on at the site visit. Call (833) 954-6066 to schedule it.
Every installation we do is covered by our 730-Day Done Right Promise, alongside the manufacturer’s own product warranty on the unit itself. If the workmanship isn’t right, we come back and fix it. Call (833) 954-6066 to go over the details on your project.
Get a Free On-Site Estimate for Custom & Geometric Windows in North Tustin
We’ll come out, template and measure your openings, and hand you a written line-item estimate for custom and geometric windows in North Tustin. No guesswork on framing, no surprise change orders. Our 730-Day Done Right Promise backs every install, and estimates are always free. Call (833) 954-6066 to schedule yours.
Written by the team at Groundwork Construction Co.












