







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Tustin: What the Job Actually Involves
Vanities, tile & fixtures work in Tustin runs $9,000 – $28,000 for a full bathroom surface and fixture package, and most jobs finish in 2 – 4 weeks of working days once materials are on site. That number covers demo of the old vanity and tile, new substrate and waterproofing, floor and wall tile, a set vanity with top and sink, and new faucet, shower trim and toilet. Call (833) 954-6066 for a free on-site estimate.
How We Run a Vanity, Tile and Fixture Job, Stage by Stage

This isn’t a swap. A vanity and tile package touches plumbing, electrical, waterproofing and finish work in a tight space, and the order of operations matters more than the speed of any one step. Here’s how a typical Tustin job moves.
Stage 1: Tear-out and inspection (1 – 2 days). We pull the old vanity, toilet, tile and any shower trim going, then open the wall behind the vanity. This is the moment we find out what the last remodel hid: drywall softened by a slow supply-line leak, a floor flange that’s rusted through, or in an Old Town bungalow, a cast-iron drain past its life. You decide at this point whether to address what we find now or note it and move on. We photograph everything before it’s closed up.
Stage 2: Rough-in changes and permit inspection (2 – 4 days, including the inspector’s visit). If the vanity is moving, or you’re adding a second sink, the drain and supply lines get reworked and the electrical for vanity lighting and GFCI outlets gets run. Tustin requires permits for plumbing relocation and new circuits, and the rough work has to be inspected before anything gets covered. You give us final fixture selections by the end of this stage, because the rough-in has to match what’s actually going in the wall.
Stage 3: Substrate and waterproofing (2 – 3 days). Cement board goes up, then a bonded waterproofing membrane over the shower walls and floor if a shower is part of the scope. This is the stage nobody sees and the one that decides whether the job lasts. You don’t have a decision here beyond approving the layout, which we mark on the wall so you can see the tile lines before a single piece goes up.
Stage 4: Tile and grout (3 – 5 days). Floor tile first, then walls, then grout and seal. Large-format porcelain runs faster than a small mosaic with a lot of grout joints, and a herringbone or offset pattern adds a day of layout and cutting on its own. We set the grout and leave it to cure before the fixtures go back in, which is why the next stage doesn’t start the same afternoon.
Stage 5: Vanity set, fixtures and trim-out (1 – 2 days). Vanity gets set and leveled, top and sink installed, faucet and drain connected, toilet reset, shower trim, mirror and towel bars hung, and the room gets a final cleaning. You walk it with us, and anything that needs correcting gets corrected before we call it done. The whole package is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions on this job come down to a handful of forks. Here’s the honest version of each.
- Vanity construction: stock, semi-custom, or custom. Stock cabinets in standard widths are the cheapest route and land in the $800 – $3,000 vanity installation range, but they only fit a wall that happens to match. Semi-custom (KraftMaid is one we work with) buys you the exact width and door style for a moderate step up. Custom millwork fits an odd Old Town alcove perfectly and costs the most.
- Vanity top: quartz, natural stone, or porcelain. Quartz holds up to daily use with almost no care and is the default for good reason. Natural stone looks richer and needs resealing. Porcelain slab is the newest option and handles water best of all.
- Floor tile: porcelain versus natural stone. Porcelain is denser, cheaper to maintain and handles a wet floor without sealing. Travertine and marble look warmer underfoot and need periodic sealing, and marble will etch if you leave the wrong cleaner on it.
- Fixture finish and brand. A Delta or American Standard faucet and shower trim in brushed nickel or matte black is the practical middle. Some brands charge a real premium for a colored finish, and that premium buys appearance, not durability.
- Toilet: standard height versus comfort height, and one-piece versus two. Comfort height is easier on knees. One-piece is easier to clean. A Toto or American Standard model in either configuration covers the range.
What Vanities, Tile & Fixtures Cost in Tustin, CA

A full package in Tustin runs $9,000 – $28,000. A single-vanity, floor-only refresh with stock cabinets lands near the bottom. A double vanity with a tiled shower, moved plumbing and premium tile sits at the top.
Five things push a job up or down:
- Footprint and layout. 35 square feet versus 70 square feet of tile is nearly double the material and labor.
- What’s behind the wall. Old galvanized supply lines or a cast-iron drain in an Old Town home can add $1,500 – $4,000 in plumbing before anything visible happens.
- Relocating the vanity. Moving a drain and supply lines is the single biggest line item that isn’t tile or a vanity.
- Tile grade. A $3-per-square-foot porcelain and a $15-per-square-foot marble are the same install labor and very different material bills.
- Permit scope. Layout changes and new circuits require permits and inspections. A straight swap doesn’t.
A written estimate from us is line-itemed: demolition, rough-in, substrate and waterproofing, tile material and labor, vanity and top, fixtures, permits and disposal. It doesn’t cover structural surprises found after demo, which we price separately and in writing before we touch them.
See the difference
Before
After
Before
After
Before
AfterWhat Tustin Homes Specifically Do to This Job
Tustin’s housing stock splits hard, and it changes the work. In Old Town, the century-old Craftsman and Spanish Revival bungalows come with 1920s framing and plumbing. We routinely find galvanized supply lines, cast-iron drains and knob-and-tube wiring behind a vanity wall, and historic-sensitive work needs a careful hand because a tile layout in a house like that rarely runs square. Out in Tustin Legacy, on the former MCAS Tustin airfield ground, the homes are new and the tile and fixture work is straightforward but the permitting runs through a newer review process tied to that master-planned district. Between the two, mid-century ranch homes from the 1950s-70s are the most common job: solid framing, tile set on a dry-pack mud bed under the old floor, and a vanity cabinet that’s seen better decades. Our technicians have up to 12 years of experience reading each of these and pricing the surprise before it becomes one. Homeowners often pair this with Tile Roofing in Tustin or Specialty Roofing in Tustin when the roof is coming due the same year.
Serving Tustin, CA – Our Local Coverage Area
We serve Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Tustin

Most jobs run 2 – 4 weeks of working days. A floor-only refresh with a stock vanity is closer to 2 weeks; a full package with a tiled shower, moved plumbing and permit inspections runs 3 – 4. Call (833) 954-6066 to schedule an estimate and we’ll give you a real timeline for your room.
Only if the scope changes the plumbing layout or adds electrical. A straight vanity and floor tile swap generally doesn’t require one; moving a drain or adding circuits does, and we pull it and pass the inspection. Call (833) 954-6066 and we’ll tell you up front which applies to your job.
Yes, and most of our Tustin jobs do exactly that. Keeping the drain and supply in place drops the price toward the low end of the $9,000 – $28,000 range and removes the inspection requirement. Call (833) 954-6066 for a free estimate on the no-relocation version.
$9,000 – $28,000 depending on room size, tile grade, vanity type and whether plumbing or electrical moves. Call (833) 954-6066 for an exact quote – the estimate is free and line-itemed.
The full job is covered by our 730-Day Done Right Promise. Anything we set, install or waterproof comes with that written guarantee, and we make it right if it fails.
Get a Free Estimate on Vanities, Tile & Fixtures in Tustin
This is a job worth getting priced before you buy a single box of tile. Call (833) 954-6066 and we’ll schedule a free on-site estimate. We measure the room, look behind the vanity wall, and give you a line-itemed quote: demo, rough-in, waterproofing, tile, vanity, fixtures and permits. Our technicians arrive in uniform and background-checked, pricing is upfront, and financing is available. This is part of our Bathroom Remodeling work, and a wider scope falls under Bathroom Remodeling in Tustin across all of Tustin.
Written by the team at Groundwork Construction Co.












