







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Laguna Hills: What It Costs and What’s Involved
Updating the vanities, tile and fixtures in a Laguna Hills bathroom usually runs $9,000 – $28,000 for a full tear-out and reinstall of the wet zone, and most jobs run 2 to 4 weeks from demo to final grout. A single-vanity swap with new tile floor and a fresh faucet set can land closer to the low end; a full floor-to-ceiling tile job with a new Toto or American Standard toilet and relocated plumbing pushes toward the top. Call (833) 954-6066 for a free on-site estimate, and we’ll give you a written line-item price in writing with no change orders hiding in the fine print.
How Our Vanities, Tile & Fixtures Process Actually Runs

Every job moves through the same five stages. Here’s what happens when, so you can plan your week around it.
Stage 1 – Walkthrough and written scope (day 1, about 90 minutes). We measure the room, check what’s behind the vanity and under the floor, and confirm what’s staying versus going. You’ll decide at this stage whether the vanity stays in the same footprint, whether the toilet moves, and whether you want tile on the walls or just the floor. That decision locks the price.
Stage 2 – Demo and rough-in inspection (days 2 – 4). Old vanity, toilet, tile and backer come out. If plumbing or electrical has to move, this is when it happens, and in Laguna Hills a moved drain or added GFCI outlet typically means a permit and a rough-in inspection before we close anything back up. In the older 1960s-70s tracts off Alicia Parkway, demo often uncovers galvanized supply lines that should be swapped while the wall is open.
Stage 3 – Prepping the substrate (days 4 – 6). Floor and walls get leveled, waterproofed and backer-boarded. This stage is invisible in the finished room, which is exactly why it’s the one that gets cut by cheap bidders. We don’t cut it. A tile floor that fails in three years almost always failed here first.
Stage 4 – Tile and fixture install (days 6 – 11). Floor tile goes down first, then wall tile, then the vanity and countertop, then the toilet and faucet set last so nothing gets chipped. This is the stage where your material choices show up on the wall, so it’s also the one to speak up on early if a grout color reads warmer than your sample.
Stage 5 – Final inspection, sealing and walkthrough (days 11 – 14, room for a couple more if the tile layout is complex). Grout gets sealed, the final building inspection clears if the job required one, and we walk the room with you. Our 730-Day Done Right Promise means if a tile pops or a faucet weeps after we leave, we come back and make it right – not argue about it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Here’s where a vanities, tile and fixtures job becomes a design decision instead of a repair. Every one of these has a real trade-off.
- Vanity: stock versus semi-custom. Stock comes in standard 24″, 30″ and 36″ widths and keeps you in the $800 – $3,000 range. Semi-custom or custom lets you match a specific wall length, but you add weeks to the schedule and a few thousand to the price.
- Countertop: quartz versus natural stone versus solid surface. Quartz resists staining and needs zero sealing. Natural marble looks stunning and etches if you leave a lemon on it overnight. Solid surface is the budget pick and the easiest to repair.
- Tile: porcelain versus ceramic versus natural stone. Porcelain is denser and handles a wet floor better than basic ceramic. Natural stone – travertine, slate, marble – is heavier, needs sealing, and adds $4 – $12 per square foot installed over porcelain.
- Toilet: standard versus comfort height versus one-piece. A standard two-piece American Standard or Toto runs $300 – $600 installed. A one-piece comfort-height model is easier on the knees and the wallet to clean, and adds $200 – $500.
- Faucet and hardware finish. Brushed nickel and chrome wear best; matte black looks sharp and shows water spots faster. Delta and Blanco both make reliable fixtures in every finish we install.
What Vanities, Tile & Fixtures Costs in Laguna Hills, CA

For a single bathroom, plan on $9,000 – $28,000 for vanities, tile and fixtures done as a package. Here’s how that number actually breaks down:
| Line item | Installed range |
|---|---|
| Vanity, countertop and sinks | $800 – $3,000 |
| Floor tile | $3,000 – $8,000 |
| Wall tile (shower surround) | $3,500 – $9,000 |
| Toilet and faucet fixtures | $600 – $1,500 |
| Plumbing or electrical relocation | $1,200 – $4,500 |
| Waterproofing and substrate | $900 – $2,500 |
What pushes you toward the high end: relocating the drain, adding a new GFCI circuit, natural stone instead of porcelain, a semi-custom vanity, or any structural change to the wall. What keeps you near the low end: a same-footprint vanity swap, porcelain tile, standard fixtures and no plumbing moved. Our written estimates spell out each line so you can see exactly what’s included. Installs, sealant, grout, haul-away and the workmanship guarantee are in. Not included: permit fees if your city requires one, upgraded stone slabs you source yourself, or a layout change that needs an engineered fix.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Hills Homes Specifically Do to This Job
Laguna Hills was incorporated in 1991 from the merger of Laguna Hills and Leisure World, so the housing here spans three distinct eras at once. The 1960s-70s tract homes off Alicia Parkway and Moulton Parkway often still carry original galvanized plumbing and aluminum wiring, and every vanity demo in those tracts is a chance to find out whether that pipe is worth replacing while the wall is open. The 1980s-90s Mediterranean two-story homes and townhomes in planned communities typically come with stricter HOA design review, which means tile color and fixture finish often need sign-off before we order. If your home sits in a hillside neighborhood above Moulton, the slope-graded construction sometimes means we hit original wood framing that’s been in contact with soil, and that gets flagged and addressed before new tile goes on a floor that will move. Both ZIP codes we cover, 92653 and 92654, follow the same city inspection path for permitted plumbing and electrical, so a relocated drain gets a rough-in inspection before the tile hides it.
If the tile scope here is part of a full Bathroom Remodeling in Laguna Hills, we scope the two together so you’re not paying twice for demo. And when homeowners are already pulling permits on the exterior, they often pair this with Tile Roofing in Laguna Hills or Specialty Roofing in Laguna Hills to get the same inspector out once. You can see our full Bathroom Remodeling service for the wider scope, and check the Laguna Hills service-area page for coverage.
Serving Laguna Hills, CA – Our Local Coverage Area
We serve Laguna Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Laguna Hills

Most single-bathroom jobs run 2 to 4 weeks from demo to final walkthrough. Tile-heavy layouts and any plumbing relocation push toward the four-week mark. Call (833) 954-6066 for a schedule built around your actual room.
Cosmetic tile, a same-footprint vanity swap and a new faucet usually don’t require one; moving a drain, adding an outlet or changing a toilet’s location does. We pull the permit where it applies and schedule the inspection so nothing gets buried under tile.
Yes – a same-footprint job is the cleanest and least expensive path. The vanity stays where it is, tile goes over the existing layout, and the price lands closer to $9,000.
A vanity alone with countertop and sink runs $800 – $3,000; add floor tile and fixtures and the package lands around $9,000 – $28,000. Call (833) 954-6066 for a written line-item estimate – estimates are free.
Every vanities, tile and fixtures job is covered by our 730-Day Done Right Promise. If something we installed fails within that window, we come back and make it right.
Get Your Free Vanities, Tile & Fixtures Estimate
Call (833) 954-6066 to schedule a free on-site estimate for vanities, tile and fixtures in Laguna Hills. We’ll measure the room, walk your material options, and hand you a written line-item price before you commit to anything. Live person answers, 24/7. Upfront pricing, no surprises. If you’re ready for a bathroom that finally holds up, we’re ready to quote it.
Written by the team at Groundwork Construction Co.












