







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Laguna Beach: What It Involves and What It Costs
A tub-to-shower conversion in Laguna Beach typically runs $3,500 – $10,000 and takes 5 to 10 working days from demo to final inspection. The job means pulling the old tub, reworking the drain and waterproofing, and setting a new tile or panel shower in the same footprint. Most conversions stay within the existing alcove, which keeps plumbing moves to a minimum and keeps the project on schedule. Call (833) 954-6066 for a free on-site estimate.
How a Tub-to-Shower Conversion Moves From Demo to Final Inspection

This isn’t a one-visit job, and we won’t pretend it is. Here’s the real sequence, with the decisions you’ll make at each stage.
Day 1: Protection, demo, and opening the wall
We lay floor and stair protection first, because a canyon-side Laguna Beach cottage usually means tight access and narrow halls. The old tub and surround come out the same day, and we open enough of the wall to inspect the valve, the drain line, and what’s behind the tile. This is where surprises surface: rusted galvanized drain arms, old drywall that was never waterproofed, or a tub set on a pad that has shifted on a graded hillside floor. You decide nothing yet except where the new shower will sit inside the alcove.
Days 2 – 3: Rough plumbing, framing, and inspection
If the valve is staying put, this stage is quick. If you’re moving the shower head, adding a hand-held, or relocating the drain to center it for a larger footprint, this is when the plumbing gets roughed in. We pressure-test, then schedule the rough inspection. That inspection is not optional in Laguna Beach, and we pull the permits and meet the inspector ourselves. By the end of day three, you need to have picked your tile and your valve trim, because the finish clock starts here. Technicians on our jobs have up to 12 years of experience, and this stage is where that matters most.
Days 4 – 6: Waterproofing and tile
This is the stage that decides whether the conversion lasts. We install a bonded waterproofing membrane over cement backer board, seal the seams and the curb, and flood-test before any tile goes down. Tile set comes next, floor and walls, with grout lines laid out so cuts land where they look intentional. This is the slowest visual change and the one homeowners watch closest. Plan on dust control and a taped-off doorway for these three days.
Days 7 – 8: Glass, trim, and fixtures
Your chosen glass goes in, whether that’s a framed panel, a frameless fixed panel with a door, or a curtain rod if you’re keeping it simple. Valve trim, shower head, and drain cover get set. Grout gets sealed. If you ordered a specific finish and it backordered, this is the one stage that can slip, which is why we lock in material choices before demo day.
Days 9 – 10: Final inspection and walkthrough
We schedule the final inspection, walk the shower with you, and demonstrate the valve, the drain, and the glass operation. You get a written punch list if anything needs a second pass. The work is covered by our 730-Day Done Right Promise, so if a grout line cracks or a seal fails within that window, we come back and fix it. That is the long version. If the wider room is also getting work, that’s the moment to look at our Bathroom Remodeling service, because a full scope and a conversion are different projects with different timelines.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Tub-to-Shower Conversion
A conversion gives you real choices, and each one trades cost against durability against looks. Here’s what actually matters.
- Acrylic or fiberglass panel surround: The lowest-cost path, roughly $1,200 – $2,500 in materials for a standard alcove. Fast to install, easy to clean, and it holds up fine in a guest bath. It looks like a panel, not tile, and it won’t match an older home’s character.
- Ceramic or porcelain tile: The middle and most popular choice. Porcelain handles moisture better than ceramic and holds up in a humid coastal bathroom. Material runs $600 – $2,000 for a typical alcove, plus setting labor. More grout lines to keep sealed than a solid panel.
- Large-format porcelain or stone-look slab: Fewer grout lines, a cleaner look, and a strong fit for the midcentury and architect-designed houses we see off Coast Highway. Costs more, and slab cutting takes more skill and more waste.
- Shower floor and drain: A linear drain lets you use larger floor tile and slope the floor in one direction. A center drain is cheaper and simpler. On a conversion, moving the drain location adds plumbing work, so decide early.
- Glass: A frameless fixed panel with a hinged door gives the most open feel and runs higher than a framed enclosure. A framed unit costs less and handles a slightly out-of-square opening better, which matters in older homes where the walls aren’t plumb.
- Valve and trim: A pressure-balance valve is standard. A thermostatic valve adds control and cost. Finish matters here too, because salt air eats cheap plated finishes fast; brushed nickel and stainless hold up better than polished chrome near the coast.
We work with a curated set of brand partners, and for glass and door work that includes names like Mr-Glass and Therma-Tru. We’ll show you samples and honest trade-offs rather than steer you to whatever is easiest to order.
What Tub-to-Shower Conversion Costs in Laguna Beach, CA

Expect $3,500 – $10,000 for a tub-to-shower conversion in Laguna Beach, with most alcove conversions landing around $5,000 – $7,500. Here’s the line-item view of what drives that number.
| Line item | Typical range |
|---|---|
| Demo and haul-away | $400 – $900 |
| Rough plumbing and valve work | $600 – $2,000 |
| Waterproofing, backer board, and pan | $700 – $1,800 |
| Tile and setting (walls and floor) | $1,200 – $3,800 |
| Glass enclosure | $600 – $2,200 |
| Fixtures and trim | $200 – $900 |
| Permit and inspection fees | $150 – $600 |
What pushes a job toward the high end: moving the drain or relocating the valve, opening a wall to discover failed framing or a shifted pan on a hillside floor, choosing large-format slab over standard tile, or adding a bench or niche. What keeps it near the low end: staying in the existing footprint, keeping the plumbing where it is, and choosing a panel surround over tile.
Every written estimate we hand you is line-itemed, with a fixed price and no change orders unless you approve them in writing first. The number you see is the number you pay. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available. What’s included: demo, rough and finish work, materials we specify, permit and inspection, and cleanup. What’s not: structural repairs found behind the wall that need their own scope, or upgraded finishes you add mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Beach Homes Specifically Do to This Job
Laguna Beach is a built-out canyon-and-cove town, and that shapes a conversion more than most homeowners expect. Nearly every house here sits on a steep, geologically constrained lot, often on pier-and-grade foundations wedged onto graded pads above Coast Highway. When we open the wall on a 1930s – 1970s cottage, we often find a tub that was set before the room’s framing settled, so the pan is out of level and the backer board never had a waterproof membrane. A conversion becomes a chance to fix that properly, but it also means the waterproofing stage can run longer than on a flat-lot Irvine build.
On the canyon streets above Coast Highway, homes are subject to hillside and geotechnical constraints that affect how we demo and haul, and tight coastal viewshed rules mean the city watches for anything visible from the street or a neighbor’s deck. The salt air off the open coast corrodes cheap fasteners and plated fixtures faster than inland, so we spec stainless and corrosion-rated hardware in the shower. Marine-layer humidity keeps the bathroom damp, which is one more reason the membrane and grout sealing get done right rather than rushed. This is why we cover the whole 92651 and 92652 area and know the local permit culture: it moves at a small-town pace, and blowing off the inspection doesn’t work here.
Serving Laguna Beach, CA – Our Local Coverage Area
We serve Laguna Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Laguna Beach

Most conversions take 5 to 10 working days from demo to final inspection. Standard panel or tile jobs with no plumbing moves land near the 5-day end, and jobs that relocate the drain, add a bench and niche, or hit a framing surprise run closer to 10. Call (833) 954-6066 to get a schedule estimate for your specific bathroom.
Yes, in most cases a permit is required, because changing a tub to a shower alters the plumbing and drain. We pull the permit and meet the inspector for both the rough and final stages, so you’re not chasing city hall. Call (833) 954-6066 and we’ll walk you through what your project needs.
Yes, and that’s the most common conversion we do. Leaving the drain and valve where they are keeps the footprint intact, avoids extra plumbing work, and keeps the cost near the low end of the $3,500 – $10,000 range. Moving the drain is doable but adds both plumbing and tile-finishing work.
Expect $3,500 – $10,000, with most alcove conversions landing around $5,000 – $7,500 depending on tile choice, glass, and whether the plumbing stays put. We give a written, fixed-price estimate so the number doesn’t drift. Call (833) 954-6066 for an exact quote; estimates are free.
Every conversion we do is backed by our 730-Day Done Right Promise. If waterproofing, tile, or a seal fails inside that window, we come back and fix it, and we put that commitment in writing. It’s one of the longest workmanship guarantees in the residential construction space. Call (833) 954-6066 to start your free estimate.
If the surrounding room needs work too, homeowners often pair the shower conversion with a broader project, and our Bathroom Remodeling in Laguna Beach page covers the full scope. We also handle exterior work for the same Laguna Beach homes, including Metal Roofing in Laguna Beach and Tile Roofing in Laguna Beach. We serve the surrounding area too: Laguna Niguel, Aliso Viejo, Laguna Woods, and Laguna Hills.
Get a Free Tub-to-Shower Conversion Estimate in Laguna Beach
Call (833) 954-6066 and a live person answers, 24 hours a day. We’ll book a free on-site estimate, measure the alcove, check what’s behind the wall, and hand you a line-item quote with a fixed price and a clear schedule. No surprises, no pressure. Estimates are free, and our technicians arrive background-checked and in uniform. If a tub-to-shower conversion in Laguna Beach is on your list, start with the call.
Written by the team at Groundwork Construction Co.












