







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Laguna Hills, CA: What the Job Actually Involves
Paver driveways in Laguna Hills generally run $7,000 to $18,000, and a typical two-car driveway is finished in 3 to 5 working days once base prep starts. The work is excavation, a compacted aggregate base, edge restraint, and interlocking pavers set in a joint sand, finished with plate compaction. Call (833) 954-6066 and we’ll walk the driveway, check the grade, and put a line-item number in writing.
How We Install a Paver Driveway, Stage by Stage

Paver work is mostly invisible work. The pavers are the last 10% of the job, and if the base underneath is wrong, you’ll see it in two winters when a section of driveway starts to cup or spread. Here’s the sequence we run, with what you decide at each step.
1. Walk-through and layout (day 1)
We measure the driveway footprint, check how water currently leaves it, and look at the transition where the apron meets the street. You’ll pick the paver style and color at this stage, and this is the moment to decide whether the driveway stops at the garage or wraps around a side yard. Changing pattern after this point means re-cutting everything.
2. Demo and haul-off (day 1 into day 2)
Existing concrete, asphalt, or old pavers come out with a skid-steer and get hauled to a local transfer station. A standard Laguna Hills two-car driveway generates several truckloads of debris, and the haul-off is a real line item, not a rounding error. If the old slab is tied into a curb, gutter, or retaining wall, we cut clean and protect the surrounding hardscape.
3. Grading and base prep (day 2 into day 3)
This is where the driveway is actually built. We excavate to the right depth for your paver thickness, bring in aggregate base in lifts, and compact each lift with a plate compactor before the next one goes down. Slope gets set so water sheds toward the street or a drain, not toward the garage slab. A driveway that drains back into the garage is the single most common failure we get called out to fix.
4. Edge restraint and paving (day 3 into day 4)
Concrete or composite edge restraint goes in before any pavers, because interlock only works if the edge holds. Then we lay the field pattern, cut perimeter pieces with a wet saw for clean uniform joints, and keep the pattern lines running true. You’ll want to be around for the first few rows to confirm the color and pattern read the way you expected.
5. Sand, compaction, and final walk (day 4 into day 5)
Joint sand goes in, the whole field gets compacted to lock the pavers together, and we sweep and clean. Then we walk the finished driveway with you, check every transition, and if a paver is chipped or a joint is off, we address it on the spot. Water testing happens here too, so you see the runoff path before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
Your driveway has three real decisions in it, and each one moves the price in a way that’s easy to understand when you’re comparing bids.
- Paver thickness: 60mm is the common residential spec and handles a normal car driveway fine. 80mm is heavier pavers for a driveway seeing regular truck traffic or a steep grade. The step up adds roughly 10 to 20% to the paver cost and is worth it on a slope.
- Material type: Concrete pavers, clay brick pavers, and travertine-set pavers are the three families here. Concrete is the most forgiving on cost and color choice. Clay brick runs higher but ages well and suits the Mediterranean homes around town. Travertine is premium, beautiful, and needs the right sealer and base or it will stain and shift.
- Pattern: Running bond and herringbone are the two you’ll see most. Herringbone is stronger for a load-bearing driveway because pavers lock on more sides, and it costs a bit more in cutting and labor. Running bond is simpler and reads more linear in a narrow driveway.
- Base and edge: Aggregate base depth and a rigid concrete edge restraint aren’t cosmetic choices. They’re the difference between a driveway that holds its shape and one that walks apart. We won’t skip either.
What Paver Driveways Cost in Laguna Hills, CA

For Laguna Hills, a paver driveway typically lands between $7,000 and $18,000. That’s the honest market range, and where your job falls depends on a short list of real variables.
- Size and access: A single-car driveway sits near the low end. A long driveway that wraps a side yard pushes high, and tight access that slows the skid-steer adds labor.
- What comes out: Thin old concrete is cheap to demo. A thick, reinforced slab bonded to a curb is not. If a retaining wall or planter has to be rebuilt to make the driveway work, that’s a separate scope item.
- Base conditions: Rocky soil or buried old footings mean more excavation and more base material. Grading on a slope takes more compaction and more edge work.
- Paver grade and pattern: Premium clay or travertine with a herringbone pattern costs meaningfully more than 60mm concrete in running bond.
- Drainage additions: A channel drain or tie-in to a storm line is worth pricing up front, not discovering mid-project.
A written estimate from us covers demo, haul-off, base, edge restraint, pavers, joint sand, compaction, and cleanup, with the pattern and paver named. It won’t include landscape repair or irrigation relocation unless we scope that with you. The number you see is the number you pay, and the whole job is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Hills Homes Specifically Do to This Job
Laguna Hills was only incorporated in 1991, and the housing stock still reflects what came before that: 1960s and 1970s Saddleback Valley tract homes sitting next to 1980s and 1990s Mediterranean two-stories in planned communities. That matters for a driveway because those eras built very different things under the slab. The older tracts often have shallow, aging flatwork that’s already cracked and heaved, which means more demo and a fresh base. The newer planned communities tend to have strict HOA design review on hardscape color and pattern, so if you’re in a townhome or planned community, we help you get the paver selection and pattern through review before we order material.
The other factor specific to Laguna Hills is the Saddleback Valley environment. Hot, dry summers and mild, wet winters mean the driveway has to shed water without a slope that pushes runoff toward the garage or the neighbor. Hillside neighborhoods off Moulton Parkway and Alicia Parkway sit on graded slopes, and a paver driveway there needs careful base compaction and edge restraint to hold grade through wet winters. Santa Ana winds drive heat and dust across exposed south- and west-facing driveways, so we’ll talk about whether a darker paver color makes sense or whether you’d rather keep a lighter tone that stays cooler. If your project is part of a full Driveway & Pavers in Laguna Hills scope, we price the drive and the surrounding hardscape together.
We handle Laguna Hills along with Laguna Woods, Lake Forest, Mission Viejo, and Coto de Caza, and our driveway & pavers service is built around this kind of work. If you’re reworking the drive and thinking about the garage, homeowners often pair this with a Garage Conversion ADU in Laguna Hills or, if the plan touches the structure, ADU Design & Permitting in Laguna Hills. It’s worth getting the driveway plan and the structure plan on the same page so you aren’t tearing out fresh pavers later.
Serving Laguna Hills, CA – Our Local Coverage Area
We serve Laguna Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Laguna Hills

Most paver driveways in Laguna Hills take 3 to 5 working days from demo to final walk. A larger or sloped driveway, or one with drainage additions, can run 6 to 8 days. Weather and HOA review timing can shift the start date. Call (833) 954-6066 for a schedule based on your actual driveway.
Resurfacing or replacing a driveway in place often doesn’t require a building permit, but expanding the footprint, changing the street apron, or altering drainage may. Because Laguna Hills sits on a mix of city and historically unincorporated county oversight, the requirement can depend on your parcel. We confirm the permit question for your address before we order material.
Usually yes. For most driveways we demo, prep, and pave without moving plumbing or irrigation, because those runs sit below the base depth or outside the footprint. If a sprinkler line, gas stub, or cleanout is in the way, we flag it during the walk-through so it’s priced before we start, not mid-job.
Paver driveways in Laguna Hills run $7,000 to $18,000 for most homes. Size, existing slab condition, base prep, paver grade, and pattern drive the number. Call (833) 954-6066 for an exact quote – estimates are free and they’re written line by line.
Our work is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. Paver manufacturers also carry their own product warranties, and we register those for you. Call (833) 954-6066 and we’ll explain what’s covered in writing before you commit.
Get Your Free Paver Driveway Estimate
We’ll come out, measure the driveway, check the grade and drainage, and put a line-item estimate in writing with the paver, pattern, and base spec named. Call (833) 954-6066 to schedule it. A live person answers around the clock, so you won’t land in voicemail, and the consult and estimate are free. If the driveway is part of a bigger plan, bring that too and we’ll price it together.
Written by the team at Groundwork Construction Co.












