







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Are Custom Windows Made? A Tustin Homeowner’s Guide to the Process, the Lead Time, and the Fit
Custom windows are made by measuring the opening, submitting those dimensions to the manufacturer for engineering review, then building a frame and sash to that exact size before cutting and coating glass to match the spec. The unit is assembled, verified dimensionally, and shipped. For a non-standard Craftsman-era opening in Old Town Tustin, that process involves a different frame run, different hardware sourcing, and a 4-6 week lead time your contractor should be building into the schedule, not discovering on order day. For a no-pressure assessment of your openings, call Groundwork Construction Co. of Tustin at (833) 954-6066.
Tustin is a split-market town. Old Town’s century-old Craftsman and Spanish Revival bungalows sit a few miles from the Tustin Legacy build-out on the former MCAS Tustin airfield, where new homes go up on former military ground. Those two housing realities put very different demands on a window order, and both push a homeowner toward custom sooner than they expect. Below is what actually happens inside the factory, what it costs, and where a homeowner should stop and hand the work to a professional.
Key takeaways
- Custom windows are built to a submitted measurement, not cut down from stock.
- Lead time on Andersen or Marvin custom units runs 4-6 weeks from order to delivery.
- Non-rectangular rough openings are handled with tolerance engineering at the factory, not shims at the job site.
- Custom replacement for a whole-house order in Tustin typically lands in the $4,500-$15,000 range; impact-rated units run $8,000-$25,000.

What happens between your measurement and the delivery truck?
Once the site measurements are taken, the order moves through five stages. Each one matters for how the window fits and how long it lasts in Tustin’s climate, where hot, dry summers and Santa Ana wind events hammer exterior surfaces while mild wet winters test seals and drainage.
- Digital measurement and spec submission. The contractor submits opening width, height, sill angle, jamb depth, and any out-of-square conditions. On an Old Town bungalow, that rough opening is often non-rectangular. The measurement has to be submitted to the minimum dimension with the correct tolerances, because the factory builds to the number it receives.
- Engineering review. The manufacturer’s team checks the spec against the frame profile, wind-load rating, and glass package. This is where a sloppy order gets caught, or doesn’t.
- Frame fabrication. Wood, vinyl, and aluminum frames are extruded or milled to the profile. Fiberglass frames are pultruded, which is why they hold their dimensions through temperature swings better than vinyl. Marvin and Andersen both run distinct fabrication lines for custom sizes.
- Glass cutting and low-E coating. Glass is cut to size, the low-E coating is applied, and the insulated unit is sealed. In Tustin, the coating choice matters: a solar-heat-gain spec tuned for this climate keeps afternoon sun from cooking the room.
- Hardware assembly and dimensional verification. Hinges, locks, and operators are installed, then the finished unit is checked against the order spec before it ships. That final check is the reason custom orders from premium manufacturers fit at a much higher rate than modified stock units.
We handle all of this on your behalf through our Windows & Doors service. Our technicians have up to 12 years of experience taking site measurements and submitting order specs that come back right the first time.
Why does an Old Town Tustin opening need custom, anyway?
Because stock windows are built to standard increments, and a 1920s bungalow in Old Town was framed before those increments existed. Rough openings in these homes are frequently out of square, out of plumb, or an odd size that no stock unit will fill without a visible filler strip or a shimmed frame that leaks air within a season. Spanish Revival homes add arched or radius openings that simply cannot be met with stock.
The manufacturing answer is tolerance engineering at the factory. The window is built to absorb the irregularity inside its own frame, so the install is clean and the seal is tight. The installers who guess and patch at the job site produce the leaks and drafts that send homeowners back to Google a year later. If you want to see how we handle measurement and install end to end, our Tustin service area page lays out the local process.

How long does a custom window take, and how is that lead time managed?
Four to six weeks from order to delivery for Andersen or Marvin custom units. That lead time is real, and pretending otherwise is how projects stall with a wall open to the weather.
Here’s the operator detail most contractors don’t publish: we schedule demo and prep work inside that lead-time window, not before it. The old unit comes out, the opening gets framed and prepped, and the new unit arrives to a ready opening rather than a hole in your wall. On a multi-window order we sequence the rooms so no living space stays exposed longer than necessary. Groundwork Construction Co. of Tustin builds that window into the project schedule from day one.
What does custom window work cost in Tustin?
Custom windows aren’t automatically a premium over stock, but the range is wider. Here’s what replacement work runs in the Tustin market:
| Work | Typical Tustin range |
|---|---|
| Window replacement (whole order) | $4,500-$15,000 |
| Impact-rated window installation | $8,000-$25,000 |
Custom sizing adds cost per unit versus stock, and impact-rated glass for Santa Ana wind and wildfire exposure adds more. Upfront pricing means the number you see is the number you pay. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so a whole-house custom order is a budgeting decision, not a shock.
Custom or stock? What to look for before you order
Not every opening needs to go custom. Here’s the comparison we walk homeowners through:
- Opening is standard and square: a stock unit from a premium line works. Don’t pay for custom.
- Opening is non-rectangular, arched, or measurably out of square: custom. This is most of Old Town.
- You want a specific profile to match the home’s original character: custom fabrication.
- Solar exposure is intense and you want a tuned glass package: custom lets you specify the coating.
- You’re on a tight schedule and the opening is standard: stock, delivered faster. Custom means the 4-6 week lead time.
Who’s accountable when the unit arrives and doesn’t fit?
We are. Our technicians verify the unit on delivery before install, and the 730-Day Done Right Promise covers both the installation and the fit. If the unit doesn’t perform as specified, we resolve it, rather than sending you to chase a manufacturer warranty on your own. That’s the difference between a contractor who installs windows and one who owns the whole order.
We work with Andersen and Marvin for window units, and we know the fabrication process inside those lines well enough to spec an order correctly. The background-checked, uniformed technicians who take your measurements are the same ones who verify the delivery and set the unit.
FAQs
Yes. Old Town Tustin’s Craftsman and Spanish Revival homes regularly have non-rectangular, out-of-square rough openings that no stock unit will fill cleanly. We take the site measurements to the minimum dimension with the correct tolerances, submit the spec, and handle any out-of-square conditions in the window frame rather than with job-site shims. Call (833) 954-6066 and we’ll look at the opening before you commit to anything.
Custom sizing adds a per-unit cost over stock, and impact-rated glass adds more. A full replacement order in Tustin typically lands between $4,500 and $15,000, while impact-rated installation runs $8,000-$25,000. The exact number depends on the opening count and the glass spec. Call (833) 954-6066 for a no-hassle, upfront quote.
Because the unit is built to your submitted spec, not pulled from a shelf. Engineering review, frame fabrication, glass cutting and coating, hardware assembly, and the final dimensional verification all take time. We schedule demo and prep work inside that window so your opening isn’t left exposed. Call (833) 954-6066 to get the timeline for your project.
Fiberglass does in most cases, because pultruded frames hold their dimensions through temperature swings better than extruded vinyl. Tustin’s hot, dry summers and intense sun exposure on south- and west-facing walls make frame stability matter. If you’re weighing materials for a sun-baked wall, call us and we’ll walk through the options.
If you’d rather have it looked at, Groundwork Construction Co. of Tustin offers a no-pressure assessment in Tustin: call (833) 954-6066. Live person, 24/7, and you’ll get a straight answer on whether your opening needs custom or stock.
Written by the team at Groundwork Construction Co. of Tustin, serving Tustin, CA.


