







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Tustin, CA
A fence gate in Tustin typically runs $650 to $2,400 installed, depending on width, material, and whether it needs a self-closing hinge or an automated opener. Most single-walk gates land in the $650 to $1,100 range, while double-drive gates and custom cedar or wrought-iron designs push toward the top of that band. We build and hang gates that open smoothly, latch cleanly, and hold their alignment through Tustin’s dry summers and the occasional Santa Ana wind event.
Groundwork Construction Co. of Tustin handles fence gates as part of our Fence Installation work across the city. A gate is the one part of a fence that moves, so it’s the part that fails first when the posts aren’t set deep enough or the hinges aren’t sized right. We treat it that way: proper footings, galvanized hardware, and a frame that won’t sag two months after we leave. If you’re ready to price a gate, call (833) 954-6066 and we’ll set up a free estimate.
Every gate we install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies whether you’re replacing a tired side-yard gate or adding a driveway gate to match a new fence line.
Key Takeaways
- Most Tustin fence gate projects fall between $650 and $2,400 installed.
- Gate alignment problems usually trace back to post footings, not the gate itself.
- Self-closing and self-latching hardware is required for pool safety compliance in California.
- We answer calls with a live person, 24/7, and provide upfront pricing before work begins.
- Every gate is backed by the 730-Day Done Right Promise.

When You Need Fence Gates
Tustin homeowners call us about gates for a handful of recurring reasons. Some are simple wear-and-tear. Others are safety or code issues that need attention before they become a bigger problem. Here’s what we see most often.
- The gate drags or won’t latch. This is the number one call we get. A gate that scrapes the ground or pops open in the wind usually means the hinge post has shifted, often because it was set in shallow soil without proper concrete. In Tustin’s clay-heavy pockets near Old Town, we see posts work loose faster than homeowners expect.
- You’re adding a pool and need a compliant barrier. California pool safety code requires a self-closing, self-latching gate that swings away from the pool. If your existing gate doesn’t do both, it fails inspection. We build gates to that standard so you’re not scrambling the week before an inspector visits.
- The old wood gate is rotting out. Tustin’s dry climate is hard on wood that isn’t properly sealed. We replace failing gates with cedar, redwood, or low-maintenance composite that holds up better to the sun and the occasional humidity swing.
- You want a driveway gate for security or privacy. A wider double gate across a driveway keeps kids and pets in, keeps deliveries out, and dresses up the front of the house. These need heavier posts and hardware than a standard walk gate, so it’s worth having us look at the span first.
- You’re replacing or extending a fence line. When a fence goes in, the gate is the piece that ties the whole run together. Matching material, height, and style matters, and so does framing the gate to swing cleanly against the new posts.
- HOA or city requirements. A number of Tustin neighborhoods and HOAs have rules about gate height, material, and visibility. We’ve worked in enough of them to know what gets approved and what doesn’t, which saves you a round of rejections.
Our Fence Gates Process
Gates fail when the foundation underneath them is wrong. Our process starts there and works outward. Here’s how a typical fence gate project moves from first call to final walkthrough.
- Free on-site estimate. We walk the property, look at the existing posts and fence line, and talk through material and hardware options. You get a written, upfront price before anything starts. The number you see is the number you pay.
- Post and footing check. Before we hang a gate, we check that the hinge post is set deep enough and anchored in concrete. In most Tustin yards that means a footing that goes below the frost line and below the reach of roots from nearby trees. If the post is undersized or loose, we reset it. Hanging a new gate on a bad post is a waste of your money.
- Material and hardware selection. We build gates in cedar, redwood, composite, and metal, and we match them to the fence line. Hinges, latches, and closers are galvanized or powder-coated so they don’t rust out in a few seasons. For pool gates, we spec self-closing and self-latching hardware that meets California code.
- Framing and construction. A gate is a small structural build, not a decorative panel. We brace the frame so it resists sagging, especially on wider spans. Our technicians have up to 12 years of experience on fence and gate work, and they’re background-checked and arrive in uniform on every job.
- Hanging and adjustment. We hang the gate, set the swing, and adjust the latch so it closes firmly without slamming. Then we test it by hand, open and closed, several times before we call it done.
- Final walkthrough and warranty. You walk it with us. We make sure the gate swings, latches, and lines up with the fence. Then it’s covered by the 730-Day Done Right Promise.
Most single-gate installs are completed in a single visit once materials are on site. Wider driveway gates or jobs that require resetting posts can take a bit longer, and we’ll tell you that up front so you can plan around it.

Fence Gates Pricing in Tustin
Fence gate costs in Tustin depend on width, material, hardware, and whether the hinge post needs to be reset. Here are the ranges we typically see for installed work, so you can budget before you call.
| Gate Type | Typical Installed Range | Notes |
|---|---|---|
| Standard walk gate (3-4 ft), wood | $650 – $1,100 | Cedar or redwood, single latch, standard hinges |
| Walk gate, composite or vinyl | $900 – $1,500 | Low-maintenance material, color-matched to fence |
| Double driveway gate, wood | $1,600 – $2,400 | Heavier posts, drop rod, wider span |
| Pool safety gate (self-closing, self-latching) | $800 – $1,400 | Code-compliant hardware, swings away from pool |
| Gate automation (opener, keypad) | $1,200 – $3,500+ | Added on top of gate cost; varies by motor and access control |
What drives the number up or down:
- Resetting the hinge post. If the existing post is loose or undersized, we pour a new footing. That’s usually $150 to $400 depending on access and depth.
- Material. Cedar and redwood cost more than pressure-treated pine but hold up better in the sun. Composite runs higher but needs less upkeep.
- Width and weight. A wide driveway gate needs heavier framing, bigger hinges, and sometimes a wheel or drop rod to keep it from sagging.
- Hardware and automation. Self-closing hinges, keypads, and openers add cost but solve real problems, especially around pools and pets.
- Matching an existing fence. If the gate has to line up with an existing run in a specific style, that adds fitting time.
We give you an upfront price with no surprises, and there’s no charge for the estimate. If you’re planning a larger project alongside the gate, our current promotions include $1,000 off projects over $10,000 and 0% financing for 18 months, so you can spread out a bigger fence and gate build without hidden fees. Call (833) 954-6066 for a free estimate tailored to your yard.
What Materials and Styles Work Best for Tustin Gates?
Cedar and redwood are the most popular choices in Tustin because they handle the dry heat well and can be sealed to last. Composite and vinyl are the low-maintenance picks if you don’t want to re-stain every few years. Metal, including wrought iron and aluminum, works well for driveway gates and for homeowners who want a more secure, decorative look.
Style-wise, we match the gate to the fence line so it reads as one continuous build. A gate that doesn’t match the fence is the kind of detail that stands out for the wrong reasons. We also look at swing direction, especially for pool gates and gates near property lines, since the swing has to clear the fence, the house, and any landscaping.
On the brand side, we work with trusted partners across our trades, from James Hardie and Belgard on hardscape and fencing elements to Andersen and Pella on the door and window side if a gate ties into an entry. We pick materials based on what fits your yard and your budget, not on what’s easiest for us to source.
Why Choose Groundwork Construction Co. for Fence Gates in Tustin?
Gates are a small job that a lot of contractors treat as an afterthought. We don’t. Here’s what working with us looks like:
- 730-Day Done Right Promise. If the gate sags, the latch fails, or the hardware doesn’t hold up, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it covers the whole gate, not just the parts.
- Live person, 24/7. Call us any time and a real person answers. No voicemail black holes, no waiting until Monday.
- Upfront pricing, no surprises. You get the number before work starts, and it doesn’t move unless you approve a change.
- Background-checked, uniformed technicians. Every technician on your property is verified and arrives in uniform. No unmarked vans, no strangers.
- Full-scope capability. If your gate project turns into a bigger fence rebuild, or you want a matching entry door, we handle it from foundation to finish line under one contractor.
Tustin is a city of older neighborhoods and newer builds, and the fence and gate needs differ block to block. In the older parts of town, we’re often resetting posts that have been in the ground for decades. In newer developments, we’re matching gates to builder-installed fences and working within HOA guidelines. That range of experience is what makes the difference on a small project like a gate.
If you’re weighing a gate replacement against a full fence project, our Fence Installation in Tustin page walks through the broader scope, and we’re happy to look at both during the same estimate.
Fence Gate Safety and What to Check
A gate is a moving structure, and a few safety details matter more than people realize. This is a what-to-check guide, not a how-to. Hanging a gate on a bad post or a worn hinge is a job for a trained professional, and the same goes for anything involving automation or electrical work.
- Pool gates: California requires self-closing and self-latching hardware, and the gate must swing away from the pool. Check that yours does both. If it doesn’t, it’s a code issue and a safety risk.
- Hinge wear: Worn hinges let a gate drop, and a dropped gate can pinch fingers or fail to latch. If your gate drags, the hinges or the post are usually the cause.
- Loose posts: A wobbling gate usually means the hinge post is moving. Pushing on the top of the gate tells you a lot. If the post moves, stop and get it looked at before it comes down.
- Automation: Gate openers involve low-voltage wiring and sometimes 120V power. That’s electrician territory. We coordinate the electrical scope rather than cutting corners on it.
If you’re not sure whether your gate is safe, call us. We’ll take a look during a free estimate and tell you straight what needs attention. Call (833) 954-6066.
FAQs – Fence Gates
How much does a fence gate cost in Tustin?
A standard wood walk gate in Tustin typically costs $650 to $1,100 installed, while double driveway gates run $1,600 to $2,400 and pool safety gates fall around $800 to $1,400. Automation adds $1,200 to $3,500 or more on top, depending on the motor and access control. Call (833) 954-6066 for an exact quote, and estimates are free.
Can you install a gate the same day?
Many single-gate installs are completed in a single visit, especially when the hinge post is sound and materials are on hand. If the post needs to be reset or poured, the job takes longer because concrete needs time to cure. Call us and we’ll give you a realistic timeline based on your gate.
Is it cheaper to repair or replace a fence gate?
Repair is usually cheaper if the post and frame are sound and only the hardware or a board or two is failing. Replacement makes more sense when the post is loose, the frame is sagging, or the gate is beyond the point where new hinges will hold. We’ll tell you which one your gate actually needs during the free estimate, not sell you a replacement you don’t need.
Do I need a permit for a fence gate in Tustin?
Most residential fence gates in Tustin don’t require a permit, but there are height and setback rules, and HOAs often have their own requirements. Pool safety gates have specific code requirements around self-closing and self-latching hardware. We’ll walk through what applies to your property during the estimate so there are no surprises at inspection.
Can you match my gate to an existing fence?
Yes. We match material, height, and style so the gate reads as part of the same fence line. If you’re adding a gate to an existing run, we’ll look at the fence condition first to make sure the new gate doesn’t highlight a mismatch. Call (833) 954-6066 to set up a free estimate.
Ready to Price Your Tustin Fence Gate?
Whether you need a walk gate that finally latches, a driveway gate that matches a new fence, or a pool gate that passes inspection, we can help. Groundwork Construction Co. of Tustin builds gates that swing clean, latch firm, and hold up through Tustin’s seasons, and we back every one with the 730-Day Done Right Promise.
Call (833) 954-6066 for a free estimate. A live person answers 24/7, and we’ll give you an upfront price before any work starts. You can also read more about our broader fence work and the full range of services we offer across our home page.
Written by the team at Groundwork Construction Co. of Tustin, serving Tustin.


