







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Laguna Beach: What the Job Actually Involves
Custom & geometric windows in Laguna Beach typically run $8,000 – $25,000 for a full-house package of arched, angled and trapezoidal units, and $4,500 – $15,000 for a partial replacement on a single elevation. The work takes two to four weeks from template to final trim, and most of that time is spent off-site building units to fit openings that are rarely square. Call (833) 954-6066 for a free on-site estimate.
How We Build and Install Custom & Geometric Windows in Laguna Beach

Geometric windows aren’t a product you order from a catalog. Every angle is fabricated to the opening, so the process is front-loaded with measurement and back-loaded with finish work. Here’s the real sequence.
Day 1: Template and condition survey (2 – 3 hours)
We measure every opening to the sixteenth of an inch and build a physical template for any unit with a non-90-degree corner. On canyon-slope homes we also check for out-of-plumb frames, rotted sill plates and water intrusion behind the existing flashing. You decide nothing yet; this visit sets the spec sheet.
Days 2 – 14: Shop fabrication
Arched, half-round, trapezoidal and angled units are built to the template. Lead time depends on material (see below) and whether the glass needs low-E coatings for west-facing coastal exposure. This is where you make the material and finish decisions, before the order locks.
Days 15 – 17: Demo and rough-in prep
We pull the old units, inspect the framing and sill, and correct any rot or out-of-plumb condition. Rough openings get new flashing and a sill pan; that step matters more on a Laguna Beach ocean-facing wall than almost anywhere inland.
Days 17 – 21: Set, seal and trim
Units go in, get shimmed plumb and level, sealed at the perimeter, and trimmed to match the surrounding finish. We check operation of any operable geometric unit at this stage.
Days 21 – 25: Finish and walkthrough
Paint or stain touch-up on interior trim, final caulk on the exterior, and a walkthrough with you. Most jobs close out inside two weeks of install start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Custom & Geometric Windows
- Wood with aluminum cladding: The most common choice on canyon and ocean-facing homes. Warm interior look, weather-resistant exterior. Budget roughly $1,200 – $2,400 per custom geometric unit. Best when the interior finish matters as much as the exterior.
- Fiberglass: Holds up well against salt air and moisture, doesn’t rot, and takes a painted finish. A practical pick for bathrooms and decks where wood fights the marine layer.
- All-aluminum: Slim sightlines and excellent corrosion resistance on the coast. Cooler to the touch inside and can feel commercial if overused on a cottage.
- Glass package: Low-E with argon is standard for west-facing units off the open coast. Upgrade to laminated glass if the unit faces the ridge wildfire zone.
- Finish and hardware: Match trim profiles to the house. On 1920s – 1970s cottages, that often means a custom profile, which adds cost but blends the geometric unit into the original facade.
What Custom & Geometric Windows Cost in Laguna Beach, CA

Plan on $4,500 – $15,000 for a partial package (one elevation or a single feature unit) and $8,000 – $25,000 for a full custom set including arched and angled units. Five things push a job toward the high end:
- Unit shape and count: A single arched unit costs far less than a bank of trapezoids; every extra angle adds fabrication and template cost.
- Existing condition: Rotted sills or out-of-plumb framing needs correction before install.
- Material grade: Wood-clad sits at the top; vinyl and fiberglass sit lower.
- Permit scope: A like-for-like replacement usually needs no permit; enlarging an opening or changing egress does.
- Site access: Canyon-slope homes often need scaffolding or a lift, which adds to labor.
A written estimate from us lists each unit, glass package, trim, permit fee and install labor as separate line items. What it doesn’t cover: structural repair if framing is damaged after demo, or exterior painting beyond touch-up. We flag both in writing up front.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Beach Homes Specifically Do to Custom & Geometric Windows
Laguna Beach is a built-out canyon-and-cove town. Nearly every home we touch sits on a steep, geologically constrained lot, and that shapes the job before we ever order a unit. Marine-layer humidity and salt air off the open coast corrode fasteners and flashing years faster than inland, so a geometric window on an ocean-facing wall needs stainless hardware and a sill pan, not galvanized. On the canyon streets above Coast Highway, we routinely find 1920s – 1970s cottages and midcentury hillside homes on pier-and-grade foundations, where an out-of-plumb opening is the norm and a square template rarely survives contact with the frame. If a project changes the opening size or adds egress, it has to clear the city’s Design Review process along with any Coastal Commission-adjacent approval; a hillside lot with a view corridor can get a project sent back over massing even after the engineer signs off. We build the template and the permit package to survive that review. If the wider scope grows into a full Windows & Doors in Laguna Beach project, we fold the geometric units into it.
Serving Laguna Beach, CA – Our Local Coverage Area
We serve Laguna Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Laguna Beach

Allow two to four weeks total from template to walkthrough. Fabrication of the custom units is the variable; install takes four to five working days on a typical house. Call (833) 954-6066 for a timeline specific to your home.
A like-for-like replacement usually doesn’t need a permit, but enlarging an opening or changing egress does. On hillside and ocean-facing homes, the review can extend to Design Review. We pull the permits and handle the inspections.
Yes, in most cases. We template the existing opening and build to fit, so the unit goes in without structural changes. If demo reveals damaged framing, we flag the repair in writing before proceeding.
Expect roughly $1,200 – $2,400 installed for one arched, angled or half-round unit in wood-clad, depending on glass and trim. Call (833) 954-6066 for an exact quote; estimates are free.
Workmanship is covered by our 730-Day Done Right Promise, and the manufacturer warranty carries through on the units. If it’s not done right, we make it right. Call for the written warranty details.
Get a Free Estimate for Custom & Geometric Windows in Laguna Beach
We’ll walk your openings, measure each one, and give you a written estimate that breaks out unit, glass, trim, permit and labor in plain terms. Upfront pricing, no surprises, and the number you see is the number you pay. Proudly part of our Windows & Doors work across Laguna Beach. Call (833) 954-6066 to schedule your free estimate.
Written by the team at Groundwork Construction Co.












