







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Ladera Ranch: What the Job Actually Costs
Custom and geometric windows in Ladera Ranch typically run $8,000 – $14,500 for a set of three to six shaped or oversized units, and a single statement arch or radius window usually lands between $2,200 and $4,500 installed. The work takes two to five weeks start to finish once the Design Review Board signs off, because every arched or angled unit is templated, built to order, and inspected. Call us at (833) 954-6066 for a free on-site estimate.
How We Run a Custom & Geometric Window Job in Ladera Ranch

Shaped windows aren’t an off-the-shelf purchase, so the sequence matters more than the install day. Here’s how the stages actually play out.
- Stage 1 – Measure and template (about 2 hours on site). We measure each rough opening, check the framing for the arch or angle, and confirm the intended sightlines from inside the room. By the end of this visit you’re deciding unit style, grille pattern, and whether the shape is a true radius or a segmental arch.
- Stage 2 – Design Review Board submittal (one to three weeks). In Ladera Ranch almost any exterior change heads to the DRB first. We prepare the elevation drawing and product spec for the submittal, and you sign off on it before it goes in. This is the longest stretch and the one that stalls jobs handled by contractors who don’t know the process.
- Stage 3 – Order and fabrication (three to five weeks). Custom units are built to the template, not pulled from stock. You’re choosing glazing, frame color, and exterior trim during this window. ES Windows and Therma-Tru both build radius and geometric units to spec; lead times vary by glass package.
- Stage 4 – Removal and framing (one to two days). We pull the old unit, correct any rot or out-of-square framing around the opening (common on 15-to-25-year-old production homes), and flash the opening. Inspection of the rough-in happens here if the permit calls for it.
- Stage 5 – Set, seal, and finish (one to two days). The unit goes in, gets sealed and flashed at the exterior, and we finish the interior trim and stucco patch. You walk the job with us and the final inspection is scheduled.
You’re deciding three things and no more: the unit style and grille, the submittal drawing, and the glazing package. Everything else is our coordination.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Geometric windows live or die on the spec, because a bad choice is expensive to undo inside a radius frame.
- Frame material. Vinyl is the value play and holds up fine in south Orange County sun, but it can’t be shaped as tightly as wood or aluminum-clad. Wood interiors with aluminum cladding outside give you the cleanest curves and last the longest, at the top of the range. Fiberglass sits in the middle.
- Glazing. Standard dual-pane keeps costs down. Low-E and laminated glass raise the price but cut heat gain and add impact resistance – worth it on canyon-adjacent homes facing Santa Ana winds.
- Shape and radius. A true radius is pricier than a segmental arch, and any non-standard angle adds fabrication cost. Eyebrow and half-round windows read best on the Mediterranean and Spanish Revival elevations common here.
- Grille pattern. Simulated divided lites match the existing window rhythm; a clean single pane looks more modern. This is largely a taste call and doesn’t move the price much.
- Trim and finish. Matching the existing stucco reveal and interior casing keeps the addition looking native rather than tacked on.
We carry a curated set of brand partners for this work, and ES Windows and ECO Window Systems both handle geometric fabrication well. Therma-Tru is a solid pick where the shaped unit sits beside a new entry door in the same elevation.
What Custom & Geometric Windows Cost in Ladera Ranch, CA

Plan on $8,000 – $14,500 for a set of three to six shaped or oversized units, or $2,200 – $4,500 for a single statement window. A larger combined window-and-door elevation that runs into full-scale work lands higher, in the $12,000 – $25,000 band. Here’s what moves the number:
- Number and size of units. Each added geometric unit carries its own fabrication and install cost.
- Shape complexity. True radius and irregular angles cost more than a simple arch.
- Glazing and frame grade. Laminated glass and clad-wood frames push toward the high end.
- Existing condition. Rotted framing or an out-of-square opening adds prep time.
- Permit and inspection scope. Structural changes or enlarging an opening raise the permit line.
A written estimate from us lists the units, glazing, trim, stucco patch, permit, and labor as separate lines – the number you see is the number you pay, with no change orders once work starts. Upfront pricing, no surprises. What typically isn’t included: interior painting, blinds or shades, and any structural engineering if the opening needs enlarging beyond the original header.
See the difference
Before
After
Before
After
Before
AfterWhat Ladera Ranch Homes Specifically Do to This Window Job
Most of the homes here are 1999 – 2008 production builds in the Toll Brothers and Rancho Mission Viejo villages, and that era of construction has a specific tell for shaped windows: the original builder-grade openings were sized to stock units, so dropping in a true radius window often means reworking the framing and stucco around it. The Mediterranean and Spanish Revival elevations across villages like Covenant Hills and Terramor were designed around arched forms, which is exactly why homeowners here want geometric windows in the first place – and why the Design Review Board scrutinizes the submittal so closely. Work done without HOA approval is a frequent compliance headache at resale. On the canyon-side slopes, Santa Ana wind exposure and wildfire hardening also push homeowners toward laminated glazing and ember-resistant exterior detailing, so the spec choice carries real local weight.
If the window project is part of a full exterior refresh, homeowners often pair it with Concrete Driveways & Concrete Work in Ladera Ranch or Asphalt Driveways & Resurfacing in Ladera Ranch while the DRB submittal is already open. For the wider scope, see our Windows & Doors service, or the city page for Windows & Doors in Ladera Ranch. We cover the whole of Ladera Ranch and the surrounding villages.
Serving Ladera Ranch, CA – Our Local Coverage Area
We serve Ladera Ranch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Ladera Ranch

Yes. Any exterior window change goes through the Design Review Board, and most replacements need a permit. We prepare the submittal and pull the permit for you so the job doesn’t get red-tagged. Call (833) 954-6066 and we’ll walk you through what your village association requires.
Two to five weeks from approval to completion, with the longest stretch being DRB review and fabrication. The actual install is two to four days. Call us for a realistic timeline once we’ve seen your openings.
Usually. If we’re replacing an existing opening with the same size and shape, no structural work is needed. Enlarging an opening or adding a new one may require a header change and engineering. We’ll tell you which you’re facing at the estimate.
A set of three to six shaped units runs $8,000 – $14,500, and a single statement window is $2,200 – $4,500. Larger combined elevations go higher. Call (833) 954-6066 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise, on top of the manufacturer’s own warranty on the units. If something isn’t right, we make it right. Call for the written details.
Get a Free Estimate for Custom & Geometric Windows in Ladera Ranch
We start with a free on-site estimate: we measure the openings, talk through shape and glazing, and lay out the DRB submittal and timeline in writing. A live person answers at (833) 954-6066 around the clock. Call today and we’ll schedule your visit and give you a straight number.
Written by the team at Groundwork Construction Co.












