







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Laguna Hills, CA: What the Job Actually Takes
New cabinets and countertops in Laguna Hills typically run $14,000 – $45,000 for the combined job, with most single-kitchen projects landing between $18,000 and $32,000. Tear-out, cabinet set, countertop templating, and installation usually take 3 to 6 weeks from demolition to final caulk, and that timeline stretches when you move a sink, a gas line, or a wall. Call (833) 954-6066 for a free on-site estimate and a written line-item price before anything gets ordered.
This page covers the cabinet-and-countertop scope on its own, not the whole room. If you’re also reworking lighting, flooring, or layout, that’s part of a full Kitchen Remodeling in Laguna Hills and worth pricing together.
How we run a cabinets and countertop job, stage by stage

Cabinet and countertop work is a sequence problem more than a construction problem. Get the order of operations right and the job moves clean; get it wrong and you’re tearing out a just-set cabinet because the dishwasher rough-in was missed. Here’s how the job actually unfolds.
Stage 1: Measure, design, and lock the list (week 1)
We measure the room to the sixteenth of an inch, photograph the existing plumbing and electrical, and sit down with you to pick box sizes, door style, finish, and countertop material. This is where you decide drawer banks versus doors, where the trash pullout goes, and whether the sink stays put or moves. Get this list finalized before ordering, because changing a cabinet box after the order is placed usually means a 4-to-8-week re-order and added cost.
Stage 2: Demo and prep (days 1 – 2)
Old counters and cabinets come out on day one, appliances get disconnected, and we open the wall where the new sink base will sit to confirm the supply lines and drain are where we think they are. Day two is patching drywall, checking that the floor is level within a quarter inch over the cabinet run (it rarely is in older homes), and setting the base line the new cabinets will sit on. You’ll want to pick your temporary kitchen setup now, because you’re without a sink for a stretch.
Stage 3: Cabinet set and level (days 3 – 5)
Base cabinets go in first, leveled and shimmed, then uppers hung to a single line. Crown molding, filler strips, and panel ends get fitted. This is the stage that separates a decent install from a great one, and it’s mostly invisible work: shims, blocking, and scribing. You’ll confirm hardware placement and pull direction before we drill.
Stage 4: Template and fabricate the countertop (days 5 – 12)
Stone and quartz countertops are templated after the cabinets are set, not before, because the template follows the real cabinet line, not the drawing. Templating takes an hour; fabrication of the slab runs 5 to 10 business days. You’ll pick your edge profile and confirm the sink and faucet cutouts at templating. Laminate or butcher block can skip the template and go in faster.
Stage 5: Counter install, sink set, and punch list (days 12 – 14)
The slab gets set, seams are joined at the shop-determined line, the sink and faucet go in, and the dishwasher gets reconnected. Final walkthrough covers door alignment, drawer glide adjustment, caulk lines, and a written punch list. Anything not done right comes back to us under the 730-Day Done Right Promise, not to a manufacturer’s fine print.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most decisions come down to five categories. Here’s the honest trade-off on each, without the showroom gloss.
- Cabinet boxes: stock vs. semi-custom vs. custom. Stock comes in fixed sizes and ships in a week; semi-custom adjusts in half-inch increments and runs 4 – 6 weeks; full custom builds to your dimensions and takes 8 – 12 weeks. For a standard Laguna Hills tract kitchen, semi-custom typically hits the right balance of fit and timeline. KraftMaid sits in that semi-custom tier and is one we install regularly.
- Cabinet finish: painted vs. stained vs. thermofoil. Painted MDF faces take a knock and show it; stained wood hides a ding; thermofoil is the budget option but peels at the edges in a hot kitchen. Painted is the most popular choice today and holds up reasonably if the finish is factory-applied.
- Countertop material: quartz vs. granite vs. laminate vs. butcher block. Quartz is non-porous and needs no sealing, which matters in a household that actually cooks. Granite is beautiful and unique per slab but needs resealing every year or two. Laminate is the cheapest and honestly fine for a rental or a flip. Butcher block is warm and damageable. Cambria quartz is a solid mid-to-upper choice in this market.
- Countertop edge and thickness. A standard eased edge is included in most installs; a mitered edge or a thicker 3cm profile adds cost but reads as higher-end. Worth seeing in person on a sample slab.
- Sink and faucet. Undermount sinks pair with stone; top-mount works with laminate. A single-basin workstation sink is the current favorite and worth the upgrade. Faucet brand matters less than the finish warranty, so read that line carefully.
What Cabinets & Countertops costs in Laguna Hills, CA

The combined cabinets and countertops job in Laguna Hills runs $14,000 – $45,000, with the low end covering a modest kitchen in a smaller tract home and the high end covering a large kitchen with custom cabinetry, a full slab of quartz, and a sink relocation. Here’s how that range breaks down by line item:
| Line item | Typical range |
|---|---|
| Cabinet installation (only) | $4,000 – $13,000 |
| Countertop installation (only) | $2,000 – $6,500 |
| Kitchen island install | $3,000 – $10,000 |
| Full cabinets & countertops job | $14,000 – $45,000 |
Five variables push a job from the low end to the high end. First, kitchen size and cabinet count: a 10×10 galley and a 15×20 island kitchen are completely different projects. Second, the condition of what’s behind the cabinets: old drywall, out-of-level floors, or a failed subfloor adds prep cost. Third, whether you move plumbing or electrical: relocating a sink drain or adding a dedicated circuit for a new range is a real line item. Fourth, cabinet grade: stock vs. custom is a $5,000 to $15,000 swing. Fifth, countertop material: laminate vs. quartz vs. a book-matched stone slab.
Our written estimate lists cabinets, countertop, labor, hardware, removal and haul-off, and permit fees separately so you see exactly what you’re paying. What it typically doesn’t include unless we call it out: appliance costs, electrical work beyond the agreed scope, and any structural repair discovered after demo. We surface those in writing before we touch them, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Hills homes specifically do to this job
Laguna Hills is a young city (incorporated 1991) with old housing stock, and that combination shows up in how kitchen cabinet and countertop jobs get permitted and built here. In the 1960s and 1970s Saddleback Valley tracts, we regularly find original galvanized plumbing behind the sink base and aluminum branch wiring feeding the countertop outlets. Both need to be addressed during a cabinet swap, not skipped, and a licensed electrician or plumber runs those changes under a separate permit that we coordinate with the city. In the hillside neighborhoods off Moulton Parkway and Alicia Parkway, many homes were built on graded slopes with wood-to-ground contact, and Santa Ana wind cycles plus winter rain have often left dry rot in the framing behind exterior wall cabinets; if we open a wall and see soft wood, we stop, document it, and price the repair before continuing.
The dense senior-housing corridors tied to the old Leisure World site, now part of Laguna Woods, bring their own layer: strict HOA design review for anything visible from the street or from a shared courtyard, and association rules about work hours and dumpster placement. In the newer 1980s and 1990s Mediterranean-style homes, cabinet layouts are usually solid but the builder-grade boxes themselves are reaching end of life, and that’s where a standard cabinet replacement is straightforward work.
If your project widens to include a bathroom, homeowners often pair this with Walk-In Showers & Shower Remodeling in Laguna Hills or a Tub-to-Shower Conversion in Laguna Hills while the dust is already flying. You can see the wider coverage we bring to the area on our Laguna Hills service-area page, and the broader scope on our Kitchen Remodeling hub.
Serving Laguna Hills, CA – Our Local Coverage Area
We serve Laguna Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Laguna Hills

Plan on 3 to 6 weeks from demo to final walkthrough for a standard kitchen, with the cabinet order lead time (4 – 6 weeks for semi-custom) sitting alongside the fabrication window. The on-site work itself is about 2 weeks; the calendar time is mostly ordering and templating. Call (833) 954-6066 and we’ll line up the actual dates against your kitchen size.
Cabinet replacement alone generally doesn’t require a permit, but any plumbing or electrical relocation, new gas line, or structural change does. We pull the permits that are required and coordinate the inspections. The number you see on the estimate is the number you pay, and permit fees are itemized in the written quote.
Yes, and staying in place is the cheapest, fastest version of this job. If you keep the sink where it is and don’t relocate the range or add a wall, we can typically skip plumbing and electrical permits and shave 1 to 2 weeks off the schedule. Moving the sink or relocating a wall changes the scope and the price.
Not on our end for anything in scope; the number on the written estimate is the number you pay. If demo reveals hidden damage like dry rot or failed subfloor, we stop, photograph it, and price the fix in writing before touching it. No change orders get signed under pressure.
Our workmanship is covered by the 730-Day Done Right Promise, one of the longest residential guarantees in the space; if something we installed isn’t right, we make it right. Manufacturer warranties on cabinets and countertops run separately and we hand you the actual documentation at the walkthrough. Call (833) 954-6066 for a free estimate.
Get a free estimate for Cabinets & Countertops in Laguna Hills
Call (833) 954-6066 to schedule a free on-site estimate and design consult for cabinets and countertops in Laguna Hills. On the call, we book a time that works for you, an estimator visits, measures the kitchen, and you get a written line-item quote with cabinets, countertop, labor, and permit fees separated out. If you’re already planning a larger project, 0% financing for 18 months and $1,000 off projects over $10,000 are both available. A live person answers, any hour.
Written by the team at Groundwork Construction Co.












