







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Anaheim, CA: What It Costs and How Long It Takes
Metal roofing in Anaheim, CA runs $15,000 to $40,000 for most homes, and a full tear-off and install takes five to nine working days once materials land on site. The number and the calendar both hinge on roof square footage, panel type, and how much of the existing deck has to be rebuilt. Call (833) 954-6066 for a free on-site estimate with a written line-item quote before anything gets ordered.
How a Metal Roof Goes On, Stage by Stage

Metal roofing isn’t a one-day swap, and anyone who tells you otherwise is skipping steps that show up two winters later. Here’s the actual sequence we run in Anaheim, with the decisions you own at each stop.
Day 1: Tear-off and deck inspection
The old roofing comes off down to the sheathing. That’s when we find out what the last layer was hiding: soft decking, popped fasteners, old flashing tarred over instead of replaced. You get photos and a decision: replace the bad decking now, or we document it and stop. On the 1950s and 60s tract homes common in the central and western ZIPs, we usually find at least a few sheets that need swapping.
Days 2 – 3: Deck repair and underlayment
Rotted or delaminated sheathing gets replaced and re-nailed to current code. Then the underlayment goes down – a high-temp synthetic or peel-and-stick membrane, not the old felt. This is the waterproofing layer that actually keeps your house dry, and it’s the step cheap bids cut. In Anaheim Hills, where wildfire-defensibility detailing matters, this is also where ember-resistant underlayment decisions get made.
Days 3 – 4: Flashing, trim, and valleys
Valleys, penetrations, chimney and skylight curbs, and eave trim all get fitted before any panel goes up. On metal roofs this stage runs longer than on shingle because flashing has to be compatible with the panel system and thermal movement. You decide on trim color and profile here if you haven’t already.
Days 4 – 8: Panel installation
Panels go on in order, with clips or fasteners set so the metal can expand and contract. On a standing-seam system, seams get crimped or zipped as we go. A typical Anaheim ranch home takes three to four days of panel work; a larger or more cut-up roof with dormers and multiple valleys can run longer. You’ve already picked your panel type by now, so this stage is mostly us and the weather.
Days 8 – 9: Final inspection, cleanup, and walkthrough
We finish the ridge, close the flashing, sweep with a magnet for stray fasteners (metal roofs shed screws, and nobody wants one in the driveway), and walk the roof with you. Permit inspection happens here too – more on that below. Then you get the paperwork and the workmanship warranty, which on our jobs is the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
Most homeowners land on one of four panel systems. Here’s the honest trade-off on each, because the sales pitch you’ll hear is not the same as the reality on your roof.
- Standing seam (the premium default): Concealed fasteners, clean vertical lines, 40-plus-year lifespan, and the least likely to leak. Costs the most, often $18,000 – $40,000 in Anaheim depending on size. Suits hillside homes in the 92807/92808 ZIPs and anyone who wants to stop thinking about their roof.
- Exposed-fastener panels (the value play): Screws go through the panel and a neoprene washer seals each one. Cheaper, typically landing toward the $15,000 – $25,000 end. Over 20 to 30 years those washers dry out in our dry heat, so the long-term risk is fastener resealing. Right call on sheds, garages, and budget-driven re-roofs.
- Stone-coated steel: Steel panels coated to look like tile or shake. The tile look without the tile weight, which matters on older Anaheim bungalows where the framing wasn’t designed for clay tile. Mid-to-high cost; hides dirt well in our dusty inland air.
- Metal shingle: Small interlocking panels that read as shingle. Good for HOA-restricted neighborhoods where a full standing-seam look gets pushback. More seams than a standing-seam panel, so more places for a problem to start.
Color and finish count too. A matte or PVDF finish holds color better than a basic painted steel in Anaheim’s semi-arid sun, and a lighter color reflects heat instead of absorbing it, which shows up in your summer cooling bill. When most of a full Roofing in Anaheim project turns into a whole-envelope conversation, we’ll steer the panel and color choice toward what fits the rest of the house.
What Metal Roofing Costs in Anaheim, CA

Plan on $15,000 to $40,000 for metal roof installation in Anaheim. That’s the market-calibrated range for a typical single-family home. The low end covers a smaller, simpler ranch with exposed-fastener panels; the high end covers a large or cut-up hillside roof with standing seam.
- Roof size: The biggest driver. Every square of extra roof area adds materials, labor, and disposal.
- Panel system: Standing seam runs well above exposed-fastener panels, both in material and in the labor to set the seams and clips.
- Existing condition: A roof over rotten decking, with multiple old layers to strip, or with failing flashing can push a job toward the top of the range. Anaheim’s older citrus-era and tract homes are where we find this most.
- Roof geometry: Hips, valleys, dormers, and multiple penetrations raise labor. A clean gable roof goes faster and costs less.
- Permit scope: A structural repair or deck replacement calls for extra inspection and can add cost. Straight re-roofs stay on the simpler side.
Your written estimate should spell out what’s included: tear-off, disposal, underlayment, flashing, trim, panel gauge and finish, permit, inspection, and cleanup. What it should never do is hand you a low number and then surprise you with change orders mid-job. Our upfront pricing means the number you see is the number you pay. For 0% financing for 18 months and $1,000 off any project over $10,000, call (833) 954-6066.
See the difference
Before
After
Before
After
Before
AfterHow Anaheim’s Housing and Climate Shape This Job
Anaheim runs two building economies side by side, and roof work here feels both. In the older central and western ZIPs (92801 – 92806), the postwar tract homes and citrus-era bungalows are often on their second or third roof, with original sheathing that has absorbed decades of sun. In the Anaheim Hills ZIPs (92807/92808), hillside custom homes face different realities: steep slopes, view-lot geometry, and canyon-edge brush-clearance and Chapter 7A wildfire-resistant detailing that flatland work never touches. Our dry summers and Santa Ana wind events drive ember-resistant detailing and a roof that has to shrug off everything the wind throws at it. Clay and sandy soils underneath the older homes also mean foundation drainage and grading matter to what the roof is sitting on. And because the city actively promotes ADU construction, a metal roof often shares a permit cycle with a new structure, which is when pairing this with Window Replacement in Anaheim or Impact Windows & Doors in Anaheim pays off in one trip. We cover all of Anaheim and the surrounding communities.
Serving Anaheim, CA – Our Local Coverage Area
We serve Anaheim and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Anaheim

Most homes take five to nine working days from tear-off to final inspection. Larger or cut-up roofs run toward the high end; a simple ranch is often done in under a week. Your written estimate will carry the timeline for your specific roof, and you’ll know if extra deck repair will stretch it.
Yes. A roof replacement is permitted work in Anaheim, and the final inspection is part of the job. We pull the permit and pass the inspection, so it’s not something you chase down. If the job involves structural repair or new decking, expect an additional inspection; your estimate will call that out.
Most re-roofs sit on the existing structure and don’t touch plumbing or framing unless the deck is failing. Standing seam adds only modest weight over shingles, and stone-coated steel is lighter than the clay tile it often replaces. If our inspection finds framing issues, we bring them to you in writing before we proceed.
Plan on $15,000 to $40,000. The range moves with roof size, panel system, existing deck condition, roof geometry, and permit scope. Call (833) 954-6066 for an exact quote – estimates are free.
Our workmanship is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right – along with the manufacturer’s warranty on the panel finish and system. You get both in writing, and calls are answered by a live person 24/7 if anything comes up after the job.
Get a Free Metal Roofing Estimate in Anaheim
A metal roof is a long-horizon decision, and a free on-site estimate is the honest way to start. We’ll walk the roof, measure, check the deck, and hand you a written line-item quote with panel options and financing details. No pressure, no vague numbers. Call (833) 954-6066 to schedule your free estimate, and our team at Groundwork Construction Co. of Tustin will get you real answers about metal roofing in Anaheim.
Written by the team at Groundwork Construction Co.












