







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Irvine is a master-planned city, and that changes everything about a bathroom surface and fixture job. Nearly every home here sits inside an HOA-governed village with architectural review, so your vanity, tile, and fixture choices aren’t just design decisions – they’re compliance decisions. Vanities, Tile & Fixtures work in Irvine typically runs $9,000 – $28,000 for a full bathroom refresh, and most jobs finish in 5 – 10 working days. Call (833) 954-6066 for a free on-site estimate.
What Vanities, Tile & Fixtures work actually involves in Irvine
This is the cosmetic-to-structural middle layer of a bathroom: replacing the vanity and top, retiling floors and shower walls, swapping fixtures (faucets, showerheads, drains, towel bars, mirrors, lighting), and addressing whatever the demo reveals underneath. It’s not a gut remodel and it’s not a quick swap – it’s the layer where most Irvine homeowners get the biggest visual change for the money.
The catch in Irvine is that “cosmetic” work often touches HOA-controlled surfaces. If your vanity tile or shower surround is visible through a window, or if you’re changing exterior-adjacent elements like a bathroom window or vent cover, the architectural committee may want a say. We plan for that review window before demo starts.
How we run a vanities, tile, and fixtures job, stage by stage

Most Irvine jobs move through five stages. Here’s what actually happens, who decides what, and roughly how long each phase takes.
Stage 1: Site walk and HOA pre-check (days 1 – 3)
We walk the bathroom, measure the vanity footprint, photograph the existing tile and fixtures, and check whether your planned materials fall inside your village’s approved palette. If you’re in a village like Woodbridge or Northwood, we ask for the ARB packet early – approval timelines vary and we don’t want a pallet of tile sitting in the garage while you wait. You decide: do you want to submit for approval yourself, or should we prep the material spec sheet for the submission?
Stage 2: Demo and substrate inspection (day 3 or 4)
We pull the vanity, remove the old tile and fixtures, and expose the substrate. In 1970s – 1990s Irvine tract homes, this is where we find the surprises: dry-set mortar that’s let go, water damage behind a shower valve, or a floor that’s out of level by half an inch. You decide nothing here – we document with photos and send you a written change order before any extra work begins. Upfront pricing, no surprises.
Stage 3: Rough-in and waterproofing (days 4 – 6)
If we’re relocating the vanity drain or adding a GFCI outlet for a lighted mirror, that happens now, before tile goes back. Shower walls get a waterproofing membrane and a flood test where the scope calls for it. This is the stage that separates a 10-year bathroom from a 3-year one, and it’s invisible once tile is up. You decide: fixture rough-in heights (standard 32″ vanity height vs. 36″ comfort height, shower valve placement).
Stage 4: Tile and vanity install (days 6 – 9)
Floor tile goes down first, then wall tile, then grout and sealant, then the vanity cabinet and countertop, then fixtures. Tile layout is set before a single piece is cut – we dry-lay the floor and confirm grout line direction and transition strips with you. You decide: grout color, tile pattern (stacked vs. offset vs. herringbone), and whether the vanity top is fabricated on-site or pre-cut.
Stage 5: Final walk and punch (day 10)
We test every fixture, check every drain for slope, verify caulk lines, and walk the room with you. Any punch items get scheduled before we close out the job. The whole scope sits under our 730-Day Done Right Promise – if a tile pops or a fixture drips, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Vanities, Tile & Fixtures is a decision-heavy job. Here’s the honest trade-off on each choice, not the sales version.
- Vanity cabinet material: Plywood box with a solid-wood face holds up best in Irvine’s dry climate – it won’t swell the way particleboard can in a humid bathroom. MDF-painted vanities cost less but show wear at the joints faster. Expect $400 – $1,800 for the cabinet alone, before the top.
- Countertop: Quartz is the practical Irvine pick – non-porous, no sealing, holds up to hard water. Cambria is a common brand partner here. Granite is beautiful but needs annual sealing; cultured marble is the budget option at $150 – $400 but chips at the edge.
- Floor tile: Porcelain is the workhorse: 12″x24″ runs $4 – $12/sq ft installed. Natural stone (travertine, marble) runs $10 – $25/sq ft and needs sealing in a wet room. Luxury vinyl plank is the low-cost alternative at $3 – $7/sq ft but doesn’t hold up in a shower zone.
- Shower wall tile: Ceramic subway is the classic and cheapest at $5 – $10/sq ft installed. Porcelain slab panels cost $15 – $35/sq ft but eliminate grout lines and clean up faster.
- Fixtures: Kohler and similar mid-tier brands run $150 – $450 per faucet and $200 – $600 for a shower trim kit. Builder-grade fixtures at $40 – $90 save money up front and fail sooner – the cartridge is usually the first thing to go.
What Vanities, Tile & Fixtures costs in Irvine, CA

A full vanities, tile, and fixtures refresh in Irvine runs $9,000 – $28,000, with the median landing around $14,000 – $16,000 for a standard hall bath. The low end covers a vanity swap, floor tile, and fixture replacement in a room where nothing moves. The high end involves relocating plumbing, natural stone, and a custom vanity.
What moves the number:
- Size and layout: a 5’x8′ hall bath sits at the low end; a 10’x12′ primary bath pushes toward the high end.
- Existing condition: water damage behind a shower wall or a rotted subfloor adds $800 – $2,500 in repair before tile goes back.
- Plumbing or electrical relocation: moving a drain or adding a circuit runs $400 – $1,500 and typically requires a permit.
- Material grade: porcelain and quartz vs. natural stone and custom cabinetry can swing the total by $6,000.
- Permit scope: cosmetic tile work often doesn’t require a permit; relocating plumbing usually does.
A written estimate covers demo, substrate prep, waterproofing, tile, vanity, fixtures, and cleanup. It typically doesn’t cover HOA application fees, structural repair found mid-demo, or moving the toilet to a new location. We spell out that line between included and excluded before you sign.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to this job
Irvine was built almost entirely by the Irvine Company from the 1970s forward, which means nearly every vanities and fixtures job happens inside an HOA-governed village with architectural review. In older villages like Woodbridge and Northwood, bathroom windows, vent grilles, and exterior-facing shower glass may need to match the original tract design vocabulary before the city will issue a permit. In newer Great Park builds, the standards are contemporary but the review is just as real. We manage the ARB submission alongside the permit so a non-conforming tile or fixture doesn’t stall the job mid-install.
The climate matters too. Irvine’s semi-arid summers and long rainless stretches bake stucco and dry out wood framing, then winter storms push moisture into any gap that’s opened up. In bathrooms, that shows up as failed caulk joints, cracked grout, and in older homes, water damage behind shower surrounds that doesn’t surface until demo. We plan for that inspection gap in every estimate, and the expansive clay soils in parts of the city mean floor tile needs a proper uncoupling membrane or it will crack within a couple of seasons. If your bathroom refresh is part of a full Bathroom Remodeling in Irvine, we flag those structural realities early.
We work across Irvine – ZIP codes 92612, 92603, 92616, and 92618 – and homeowners often pair bathroom work with Tile Roofing in Irvine or Specialty Roofing in Irvine when the exterior comes up in the same review cycle. If you’re coordinating a bigger scope, our Bathroom Remodeling hub lays out the full picture, and our Irvine service page covers everything we handle in this city.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Vanities, Tile & Fixtures in Irvine

Most jobs take 5 – 10 working days once demo starts, plus 2 – 4 weeks of lead time if HOA architectural review is required. Tile-and-vanity-only projects usually run 5 – 6 days; anything involving plumbing relocation or shower waterproofing runs closer to 8 – 10. Call (833) 954-6066 for a schedule estimate based on your specific bathroom.
Cosmetic tile and fixture replacement usually doesn’t require a permit; relocating plumbing, adding electrical circuits, or changing the footprint does. The line matters because a permit-triggered job also triggers inspection, which adds 1 – 2 weeks to the timeline. We tell you upfront whether your scope crosses it.
Yes – that’s the majority of what we do, and it’s the fastest, cheapest version of the job. A vanity and tile refresh with fixtures staying in place runs closer to the $9,000 low end. Relocating a drain or adding a lighted mirror circuit pushes you toward the high end. We’ll show you exactly what each option costs before you commit.
Sometimes. Interior tile and vanity finishes generally don’t require HOA review, but exterior-visible changes (bathroom windows, vent covers, shower glass visible from outside) often do. In Woodbridge, Northwood, and similar villages, we prep the material spec sheet for your architectural submission so the approval moves alongside the permit.
Every job is covered by our 730-Day Done Right Promise – if something fails in workmanship, we come back and make it right. Tile, waterproofing, and fixture installation all fall under it. Material warranties run separately through the manufacturer. Call (833) 954-6066 for the full written terms.
Get a free estimate for vanities, tile, and fixtures in Irvine
Call (833) 954-6066 to schedule a free on-site estimate. We’ll walk your bathroom, measure the vanity and tile footprint, flag any HOA review your village requires, and hand you a written line-item quote with the included scope and excluded scope spelled out. No pressure to sign on the spot. That’s what an upfront number looks like, and it’s why Irvine homeowners keep calling us back for the next room.
Written by the team at Groundwork Construction Co.












