







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBrick Paver Driveway in Tustin, CA
A brick paver driveway in Tustin, CA typically runs $14 to $26 per square foot installed, and a standard two-car driveway of about 480 square feet lands between $6,700 and $12,500 depending on paver selection, base prep and the slope of your lot. Brick pavers are clay or concrete units set on a compacted aggregate base and sand joint, which makes them repairable, permeable and far more forgiving of the soil movement we see across Tustin than a poured slab would be.
Groundwork Construction Co. of Tustin installs brick paver driveways for homeowners who want the look of a real masonry driveway without the cracking that follows a bad base. We build on a properly excavated subgrade, use Belgard and other verified brand partners for the units and edging, and back the entire installation with our 730-Day Done Right Promise. If the pavers settle, shift or heave within that window, we make it right. Call (833) 954-6066 and a live person answers, day or night, to schedule your free estimate.
This page covers the brick paver side of our work. For the full range of hardscape and driveway options we handle, see Driveway & Pavers, and for the broader Tustin service overview, start at our home page.
Key Takeaways
- Brick paver driveways in Tustin average $14 to $26 per square foot installed, with most two-car driveways landing between $6,700 and $12,500.
- Base preparation is the single biggest factor in whether pavers stay flat. We excavate to depth, compact in lifts, and use proper edge restraint.
- Clay brick holds color better in Tustin’s inland heat than many concrete pavers, but both work when installed correctly.
- We back every brick paver driveway with the 730-Day Done Right Promise and offer 0% financing for 18 months plus $1,000 off projects over $10,000.
- Call (833) 954-6066 for a free estimate. Live person, 24/7.

When You Need Brick Paver Driveway
Homeowners call us for brick pavers when the existing driveway has stopped doing its job or when they’re reworking the front of the house. Here are the situations we see most often in Tustin.
- Your concrete driveway has spider-cracked or heaved. Tustin sits on clay-heavy soils in pockets like the older tracts near Old Town and along Newport Avenue, and clay expands and contracts with the seasonal moisture swing. A poured slab has no give. Pavers flex at the joints, which is why you’ll often see 40-year-old brick driveways still sitting flat while the slab next door has cracked through.
- Tree roots have lifted a section of the driveway. The mature sycamores, liquidambars and ficus that shade so many Tustin front yards push roots under slabs and lift them into trip hazards. Pavers can be pulled, the root addressed, the base re-leveled and the same units reinstalled. Try that with concrete.
- You’re adding a driveway where there wasn’t one, or widening one for a second vehicle. If you’re converting lawn to parking or widening to fit an RV or a third car, pavers let you match an existing hardscape or create a clean new edge without a cold joint against the house.
- You want a permeable surface for stormwater. Tustin gets the occasional heavy winter storm, and a properly built paver driveway with open-graded base and sand or polymeric joints drains far better than a sealed slab. For sloped lots that sheet water toward the garage, this matters.
- The old asphalt is failing at the edges and crumbling into the street. Asphalt in Tustin’s inland sun oxidizes and ravels at the edges within 15 to 20 years. A paver driveway with a proper concrete curb or edge restraint holds its shape and doesn’t rut.
- You’re upgrading curb appeal before a sale or a remodel. A brick paver driveway is one of the few exterior upgrades that reads immediately in listing photos and holds up to the Southern California sun without fading like a stamped overlay will.
If any of those sound familiar, we can look at it in person. Call (833) 954-6066 and we’ll set a free estimate. Our technicians have up to 12 years of experience on hardscape work, and they arrive background-checked and in uniform, not in an unmarked van.
Our Brick Paver Driveway Process
Every brick paver driveway we build in Tustin follows the same sequence. The steps don’t change because the base is what makes the driveway last, and skipping steps is how you get a driveway that looks great for a season and shifts by the next spring.
- Site evaluation and layout. We walk the property, check the slope and drainage away from the garage, look at existing utilities and irrigation, and confirm the driveway width and paver pattern you want. We measure the existing grade so the finished driveway ties in cleanly to the apron at the street and the threshold at the garage.
- Demolition and excavation. We remove the old concrete, asphalt or soil to the correct depth for your base and paver thickness. That’s typically 6 to 8 inches of compacted aggregate under the pavers for a residential driveway, plus the paver depth. We haul off debris and leave the site clean daily.
- Base and compaction. We lay and compact the aggregate base in lifts with a plate compactor, then screed it to final grade. This is the step most failures trace back to. We don’t skip it, and we don’t shortchange the compaction because it’s the slow part.
- Edge restraint and paver installation. We set a concrete or spiked plastic edge restraint along the sides to lock the field in place, then lay the brick pavers in your chosen pattern (running bond, herringbone, basketweave) with consistent joint spacing.
- Cutting, joint sand and cleanup. We cut edge and border units with a wet saw for clean lines, sweep polymeric or kiln-dried sand into the joints, compact the field one final time, and clean the surface. We walk the finished driveway with you before we pack up.
- Final walkthrough and warranty. We go over care and sealing guidance, hand you the paperwork, and confirm the 730-Day Done Right Promise in writing.
What We Check Before We Build
A brick paver driveway is only as good as the ground under it. Before we quote, we look at a few things specific to Tustin lots:
- Soil and slope. Clay-heavy soils need deeper base and better drainage than sandy lots. Sloped driveways need the drainage designed in, not added later.
- Drainage away from the garage. We set finished grade so water sheets toward the street or a drain, never toward the garage door threshold.
- Tree roots and utilities. We locate irrigation lines, gas and water service, and root zones before we dig, so we can plan around them rather than cut through a line mid-install.
- Permits. Most residential driveway replacements in Tustin don’t need a permit if you’re not changing the grade, the footprint or the connection to the public right-of-way. Widening a driveway or altering the street apron can trigger a city review and an encroachment permit. We’ll tell you which category your project falls into before we start, so there are no surprises.

Brick Paver Driveway Pricing in Tustin
Brick paver driveways in Tustin cost between $14 and $26 per square foot installed for most residential projects. A standard two-car driveway of roughly 480 square feet comes out between $6,700 and $12,500. A single-car driveway of about 240 square feet runs $3,400 to $6,200. Larger driveways, custom patterns, and lots that need excavation or a drainage retrofit push toward the higher end.
Below are the line-item ranges we use for Tustin residential work. These are honest numbers, not teaser pricing. Your exact quote depends on the specifics of your lot, and we give you an upfront number that doesn’t change mid-project.
| Line item | Typical Tustin range | Notes |
|---|---|---|
| Paver material (per sq ft) | $6 – $14 | Clay brick sits at the top of the range; concrete pavers at the lower and mid end |
| Base prep, excavation, haul-off | $4 – $7 | Includes 6 – 8 inches of compacted aggregate and debris removal |
| Installation labor | $3 – $5 | Higher for complex patterns like herringbone with borders |
| Edge restraint and cutting | $1 – $2 | Concrete or spiked plastic edge, wet-saw cuts at borders and aprons |
| Sealing (optional) | $1.50 – $3 | Recommended in Tustin to lock color and cut dust; typically re-applied every 3 – 5 years |
| Drainage retrofit (if needed) | $800 – $2,500 | Channel drain, French drain, or grade correction on problem lots |
What Affects the Cost in Tustin
- Driveway size and shape. Straight driveways run less per square foot than curved or angled layouts, which require more cutting and waste.
- Paver selection. Clay brick costs more than concrete pavers but holds color longer under inland sun and won’t fade the way a thin surface dye can.
- Base conditions. Loose or saturated soil, or a lot where the old concrete slab is thicker than expected, adds excavation time and haul-off cost.
- Drainage. Sloped lots or driveways that currently sheet water toward the house may need a channel drain or grade work to keep water moving away.
- Pattern complexity. A running bond with a single border is the least labor-intensive. Herringbone basketweave and multi-unit blends take longer and cost more to install.
- Permits. If your project touches the public right-of-way or changes the apron, add city review and possible encroachment permit cost.
We offer 0% financing for 18 months on qualifying projects and $1,000 off any project over $10,000, and we’ll walk you through both before you commit to a number. Call (833) 954-6066 for a free estimate and design consult. Live person, no voicemail, no waiting until Monday morning.
Repair, Resurface or Replace?
A failing paver driveway is often repairable without a full rebuild, which is one of the biggest advantages of brick pavers over poured concrete. If the base is solid and the problem is isolated (a few settled units, a broken edge, joints that have washed out), we can lift the affected area, correct the base and reset the same pavers for a fraction of a full replacement. We usually see repairs at about 20% to 40% of new-install cost. If the base has failed across the whole field, or the pavers are past their useful life, replacement is the better investment. We’ll tell you which one your driveway actually needs, and we don’t pad the scope.
Sealing in Tustin’s Climate
Tustin’s inland heat and intense summer sun break down the joint sand and fade paver color faster than in coastal areas. A quality penetrating sealer applied after install helps lock the joints, resist UV fading, and keeps the pavers looking new. We typically recommend re-sealing every 3 to 5 years. If your driveway is new and you want to seal, wait 30 to 60 days after install to let moisture out, then call us. We’ll give you a standalone number.
Can You Do a Border, Inlay or Custom Pattern?
Yes. We install herringbone, running bond, basketweave, and multi-color blends with or without a soldier course border. Custom borders and contrasting inlays add to the cost because they add cutting and layout time, but they also give the driveway a finished look that plain field pavers don’t. Tell your estimator what you’re picturing and we’ll price it as a separate line so you can see what the upgrade costs.
What Brands Do We Use?
Our paver and hardscape work is anchored by Belgard, with other top-tier brands available where the project calls for them. In the house, our window and door work uses brands like ES Windows, ECO Window Systems and Therma-Tru, and we carry similar curated quality across every service line we offer. We don’t install whatever’s in stock at the yard and hope it holds up. If you’re building a full exterior remodel that touches doors, windows and hardscape, we can coordinate it under one contract. See Driveway & Pavers in Tustin for the broader hardscape range.
FAQs – Brick Paver Driveway
How long does a brick paver driveway last in Tustin?
A properly built brick paver driveway holds up 25 to 40 years or more in Tustin’s climate, against roughly 15 to 25 years for a poured concrete slab. Colorado clay, inland sun and storm cycles wear pavers far more gracefully than they wear concrete because pavers have joints that move with the ground. The base and installation quality decide the lifespan, which is why we don’t shortcut excavation or compaction. Call (833) 954-6066 for a free estimate on a new brick paver driveway.
How much does a brick paver driveway cost in Tustin?
A brick paver driveway in Tustin runs $14 to $26 per square foot installed, so a 480-square-foot two-car driveway lands at roughly $6,700 to $12,500. Material choice (clay brick vs. concrete paver), pattern, base conditions and any drainage work all move the number. We give you an upfront line-item quote and it doesn’t change mid-job. Call (833) 954-6066 to schedule a free estimate, and estimates are free.
Can you match my existing brick pavers or hardscape?
Yes, in most cases. We can often source a matching paver from current manufacturer lines, or find a close match where an exact product has been discontinued. If you don’t have the original unit sample or product name, we’ll work from photographs and an in-person color match. Call (833) 954-6066 and bring a photo if you can; it speeds up the estimate.
Do brick paver driveways need a permit in Tustin?
Most residential driveway replacements in Tustin don’t require a permit if you aren’t changing grade, footprint or the connection to the street. Widening the driveway, altering the street apron, or re-grading in a way that affects drainage toward the public right-of-way will typically trigger a city review and possibly an encroachment permit. We’ll tell you which category your project is in before we pull a shovel. Call (833) 954-6066 for a straight answer on your specific lot.
How long does the installation take?
Most residential brick paver driveways in Tustin take 3 to 7 working days from demo to final walkthrough, depending on square footage, pattern complexity and whether the existing slab is thick or the base needs extra excavation. A straightforward 480-square-foot driveway with a simple running bond pattern is often done in 3 to 4 days. We give you a realistic schedule up front, not a guess designed to land the job.
Why choose Groundwork Construction Co. of Tustin?
You choose us because the number we quote is the number you pay, the technicians who show up are background-checked and in uniform, and the work is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. We answer the phone live 24/7, and we’ve been serving local communities since 2014 with a curated brand lineup across all seven of our service lines, from hardscape to kitchen and roof. Call (833) 954-6066 and we’ll set up your free estimate.
Schedule Your Brick Paver Driveway in Tustin
A brick paver driveway changes the whole front of a Tustin house, and done right it outlasts every other option on the market. We build on excavation and compaction that hold up to Tustin clay, use quality pavers that hold their color under inland sun, and back the work with the 730-Day Done Right Promise. The number we quote is the number you pay, and our 0% financing for 18 months plus $1,000 off projects over $10,000 makes a full driveway rebuild easier on the budget than most homeowners expect.
Call (833) 954-6066 for a free estimate and design consult. A live person answers any time, day or night, and we’ll get a technician out to look at your driveway and give you an upfront, line-item price. From foundation to finish line, one contractor, one contract, one written guarantee.
Written by the team at Groundwork Construction Co. of Tustin, serving Tustin.


