







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in Tustin, CA
A walk-in shower installation in Tustin typically runs $4,200 to $11,500, and most projects wrap in three to seven working days depending on tile work and whether we’re moving the drain. We install curbless and low-curb showers that replace an old tub-and-surround combo with something you can step into without lifting a leg over a wall. Groundwork Construction Co. of Tustin handles the full scope – demo, waterproofing, plumbing rough-in, tile, glass, and finish – under a single crew, backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. Call (833) 954-6066 and a live person answers, any hour. If you’re planning a larger overhaul alongside the shower, start with our Bathroom Remodeling in Tustin page for the full picture, or go straight to the parent Bathroom Remodeling service overview.
Key Takeaways
- Most walk-in shower installs in Tustin land between $4,200 and $11,500, with curbless and tile-heavy builds at the top of that range.
- We waterproof to current Tustin Building Division standards – the pan and wall membranes get inspected, and the tile goes on after.
- Frameless glass, linear drains, and large-format tile are the three biggest cost drivers we see on Tustin jobs.
- Every installation carries our 730-Day Done Right Promise and upfront pricing – the number you see is the number you pay.
- We offer 0% financing for 18 months and $1,000 off projects over $10,000.

When You Need Walk-In Shower Installation
Walk-in showers solve a specific set of problems, and in Tustin we see the same handful of triggers come up again and again. Here’s what tells us it’s time.
- Aging in place. If someone in the home is recovering from surgery, managing balance issues, or simply done with climbing over a tub wall, a low-curb or curbless shower removes the step. We build the slope and drain placement so the floor drains cleanly without a threshold you have to clear.
- An old tub surround that’s failed. Tustin has a lot of homes built in the 1970s and 1980s, and we regularly pull out fiberglass surrounds with cracked pans, soft subfloor, and mold behind the tile. If your grout lines keep turning dark no matter how often you clean, the waterproofing behind them is likely gone.
- Tight bathroom layouts. A walk-in shower without a swinging tub door buys back square footage in smaller Tustin bathrooms – we can usually add six to ten usable inches by going frameless or using a fixed glass panel with a small swing section.
- Hard water staining. Tustin’s water supply runs on the harder side, and older shower valves and showerheads scale up fast. When we open the wall to run new plumbing for the shower, it’s the right moment to replace the valve body and cartridge so you’re not back in there in two years.
- A bathroom that’s never been updated. If the tile pattern and the fixtures still look like the original build, the shower is usually the first thing to go, because it’s the fixture that gets used hardest and fails first.
- You want a wet-room look without the tub. Curbless showers paired with large-format porcelain are the most-requested upgrade we quote in Tustin right now, and they only work when the framing and floor have been checked for slope and joist condition first.
Our Walk-In Shower Installation Process
Every walk-in shower we build follows the same sequence, because skipping a step here is how showers leak two years later. Here’s what happens on a typical Tustin install.
- Site visit and scope. We measure the footprint, check the drain location, look at the framing, and confirm what’s behind the existing wall. You get a written scope and a fixed price before any demo begins – no-hassle upfront pricing, no surprises.
- Demo and rough-in. The old surround and tub come out, and we inspect the subfloor and studs. If the drain needs to move for a curbless build, we do it now. New valve body, showerhead and hand shower go in at this stage.
- Waterproofing. Cement board or foam backer goes up, then a liquid or sheet membrane over the pan and walls, with the corners and penetrations sealed properly. This is the single most important step in the job, and it’s the one cheap bids skip.
- Tile and finish. Floor tile slopes to the drain, wall tile goes up on a level line, and grout and sealant finish the job. Niche placement, bench seats, and grab bar blocking are set before the tile so nothing gets drilled through a membrane later.
- Glass and hardware. Frameless glass gets templated after tile is set, then installed with the door and panel. We use quality hardware and partner with glass fabricators like Mr-Glass for accurate fit.
- Final walkthrough. We run water, check the drain, look for any weep or slope issues, and hand you the paperwork on your 730-Day Done Right Promise. If anything comes up in the next two years, we come back and fix it.

Walk-In Shower Installation Pricing in Tustin
Here’s where most Tustin walk-in shower projects land, line by line. These are real ranges for our market – not the national averages you’ll see on big-box sites.
| Scope | Typical Range |
|---|---|
| Basic acrylic or fiberglass walk-in insert (low curb) | $4,200 – $6,500 |
| Tile shower, low curb, standard drain location | $6,800 – $9,500 |
| Curbless tile shower with linear drain and framing work | $9,200 – $11,500 |
| Frameless glass enclosure (per installation) | $1,400 – $3,200 |
| Grab bar blocking and install (aging-in-place) | $250 – $600 |
| Niche or bench addition | $400 – $1,100 |
| Valve and showerhead replacement (if not already in scope) | $350 – $750 |
What drives the price up: moving the drain (adds $800 to $1,800 because the floor framing and plumbing have to be reworked), curbless conversions that need a floor recess, large-format tile (12×24 and up requires a flatter substrate and a more careful install), custom mosaic work, and glass upgrades like brushed nickel or matte black hardware. What keeps it down: reusing the existing drain location, sticking with a low curb instead of curbless, choosing a standard porcelain tile instead of marble or natural stone, and using a semi-frameless enclosure instead of a full frameless one.
We quote the whole job in writing before demo, and the number you see is the number you pay unless you add scope mid-project. We also offer 0% financing for 18 months and $1,000 off projects over $10,000 – so a full bathroom refresh and walk-in shower install can be rolled together without all that cost landing at once. Free estimate and design consult, no obligation.
If you’re doing the shower alongside a floor, vanity, or other work, that’s a natural fit for our bathroom remodeling team – combining the two usually saves on demo and rough-in costs.
Why Homeowners in Tustin Call Us for Walk-In Showers
We’re a full-scope construction company, which means the shower install you’re getting is part of a bigger operation – not a specialty glass guy and a separate tile guy who’ve never met. Here’s how that shows up on your job.
730-Day Done Right Promise. Every walk-in shower we install comes with our two-year workmanship guarantee. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to the waterproofing, tile, glass, and plumbing we install.
Live person, 24/7. Call (833) 954-6066 and a real person picks up – no voicemail, no waiting until Monday morning. If you’re standing in a shower that’s leaking through the ceiling at 9pm, you get an answer.
Background-checked, uniformed technicians. The crew that shows up is verified and in uniform. Not a crew in an unmarked van. That matters when someone’s working inside your home for days at a time.
Upfront pricing, no surprises. Fixed quote, written scope, and a clear line-item breakdown so you can see exactly where the money goes.
Trusted brands for the finishes. We work with Kohler for fixtures and finishes, and quality glass fabricators like Mr-Glass for enclosures. For windows and doors in the same bathroom, we’ve worked with brands like ES Windows and Therma-Tru on projects throughout Tustin.
Up to 12 years of technician experience. Our technicians have up to 12 years of experience on shower installs, waterproofing, and tile – which is what makes the 730-Day promise possible to stand behind in the first place.
What to Expect From Your Install Day
Walk-in shower installs are usually one to three days of intense activity followed by glass installation a week or so later, once the tile has cured. Here’s the rhythm you can plan around.
- Day 1-2: Demo, plumbing rough-in, and waterproofing. This is the messy part – expect noise, dust, and someone in and out of the bathroom all day.
- Day 2-3: Tile set. Slowest part of the job, and the one that determines how the whole shower looks.
- Day 3-5: Grout, sealant, fixtures, trim, cleanup.
- Day 7-10: Glass templating and installation. The shower works once the valve is in, but the full enclosure goes on last.
You can use the bathroom once the glass is in and the sealant has cured, usually about 48 hours after the last piece goes up. We’ll tell you the exact timing on the day.
Common Walk-In Shower Mistakes We Fix on Tustin Jobs
We get called to repair shower installs other companies did, and the failures tend to cluster around the same few places. Worth knowing before you hire anyone.
- Waterproofing shortcuts. Lining the pan with green board and a skim coat isn’t waterproofing. In Tustin, where we get warm, humid stretches, that shows up as soft framing within a few years. We use a proper membrane system and document it.
- No slope on a curbless floor. A curbless shower needs the floor recessed or the drain set to slope correctly. If the tile guy laid it flat, the water pools – which looks fine until it starts seeping under the glass.
- Glass templated too early. If the glass is cut before the tile is fully set, it doesn’t fit right, and the gaps get filled with caulk. We template after cure.
- Niche and grab bar blocking done after tile. Every niche and grab bar we install has blocking behind it, set before the tile goes up. That’s how you avoid drilling into a waterproofed wall later.
- Wrong valve for the showerhead height. Especially on curbless builds – if the valve is set at tub height and you’re installing a ceiling-mount rain head, the pressure and temp balance gets off. We set the valve to the finished shower config, not to the old tub setup.
If you’ve had a shower fail once already, that history is useful to us. We’ll check the existing framing and subfloor before we quote the rebuild, because a fix that ignores the cause just puts the same failure back a few years later. Our bathroom remodeling page covers the broader bathroom scope if you’re looking at more than just the shower.
Areas We Serve Around Tustin
We work throughout Tustin and the surrounding neighborhoods – Old Town Tustin, Tustin Ranch, the areas bordering Irvine and Santa Ana, and out toward the foothills. Each has its own housing stock character: Tustin Ranch tends toward newer builds where the issue is style and fixture age, while Old Town and the older neighborhoods often need full rough-in work because the framing and plumbing are original. If you’re not sure whether your address is in our service area, call and ask. We’ll tell you straight.
If you’re on the Irvine side of town, our Bathroom Remodeling in Irvine page has the local details for that market. And if the project is part of a larger remodel, our Kitchen Remodeling in Tustin and Home Additions & ADU in Tustin pages cover the adjacent scopes we handle.
FAQs – Walk-In Shower Installation in Tustin
How much does a walk-in shower installation cost in Tustin?
A walk-in shower installation in Tustin typically costs $4,200 to $11,500, depending on whether you’re going with a standard acrylic insert or a curbless tile build with frameless glass. The biggest cost drivers are drain relocation, curbless conversions, tile size and material, and glass style. Call (833) 954-6066 for an exact quote on your bathroom – estimates are free.
Can you install a walk-in shower in a single day?
No – most walk-in shower installs take three to five working days, plus a separate visit for glass after the tile cures. A one-day install usually means an acrylic insert over the existing pan, which we can do, but it won’t include new waterproofing or tile work. If you want tile, plan on the multi-day schedule. Call (833) 954-6066 and we’ll confirm your timeline on the estimate.
Do I need a permit for a walk-in shower in Tustin?
Yes, in most cases. The City of Tustin Building Division requires a permit when you’re moving plumbing, changing the drain location, or doing a curbless conversion that involves floor framing work. A straight replacement of a shower with the same plumbing footprint often doesn’t need a permit, but we confirm that on a case-by-case basis. We handle the permit paperwork and inspections on your behalf.
Is a walk-in shower harder to maintain than a tub?
A walk-in shower is generally easier to maintain than a tub, because there’s no tub wall to scrub and no hidden track to catch mold. The tradeoff is the glass – it needs a squeegee after each use, and frameless glass shows water spots more quickly than framed glass. With Tustin’s harder water, you’ll want to wipe it down regularly to avoid mineral buildup on the panels. Call us at (833) 954-6066 for questions about materials that hold up best to hard water.
Can you install a walk-in shower with grab bars for aging in place?
Yes – we install walk-in showers with grab bars, blocking, and low or curbless thresholds specifically for aging-in-place needs. The key is installing blocking behind the tile before it goes up, so grab bars can be bolted to solid framing instead of through a waterproofed wall. We’ll plan the layout around how you actually move in the bathroom.
Will you need to remove my existing tub to install a walk-in shower?
Yes, if your existing tub occupies the shower footprint. Removing the tub is included in the demo and rough-in phase of the project. We dispose of it as part of the job. The exception is if you’re keeping the tub and adding a separate shower elsewhere – that’s a different scope and priced accordingly. Call (833) 954-6066 to talk through which option fits your bathroom.
How do I compare walk-in shower bids from different contractors?
Compare the scope of work, not just the total. The three things to check are: whether the bid includes waterproofing membrane over the pan and walls, whether glass is included or priced separately, and whether the installer is doing permit and inspection. Bids that look cheap usually skip one or more of those. We quote every line item, so you can compare apples to apples. Call us for a free written estimate.
Ready to Plan Your Walk-In Shower?
If you’re in Tustin and thinking about a walk-in shower install, the right first step is a free estimate and design consult. We’ll come out, look at your bathroom, measure the footprint, and give you a fixed written quote – no rough guess, no scope you’ll find hidden exclusions in later. We handle budgets from the $4,200 acrylic-insert end to curbless tile builds with frameless glass, and we can roll the shower into a broader bathroom remodel if you’re updating the whole room.
Call (833) 954-6066 and a live person will pick up – any hour, any day. We’ll set up your estimate, walk you through the 0% financing for 18 months and $1,000 off projects over $10,000, and get you on the schedule. You can also start with our Bathroom Remodeling in Tustin page or the Bathroom Remodeling service overview if you want the fuller picture first. Either way, you’ll be talking to a real person who can answer your questions instead of a voicemail.
Written by the team at Groundwork Construction Co. of Tustin, serving Tustin.


